Removal of stickers on paper
Paper labels, when removed leave many small pieces of paper and glue. It is easy to get rid of them with a sponge and hot water. It is necessary to moisten the entire surface of the label and some time to wait. After the water has soaked through the paper surface, you can RUB the sponge periodically wetting it with hot water. It is best to RUB with the rough side of the sponge. Thus, the paper and the glue roll and removed without leaving residue. The surface of the refrigerator should be wiped with a dry cloth to avoid stains from water.
Removal of stickers, polymer-based
First, the sticker must be removed using a paper or kitchen knife. It is enough to gently pry a corner and, slowly, so as not to break, pulling diagonally. After removal of the film on the surface of the refrigerator may be left with a layer of adhesive. To clean it by using hot water or chemicals.
Adhesive removes fine liquid varnish remover. However, wipe very carefully, pressing lightly on the moistened cotton swab. For removing adhesive residue, perfect alcohol. It is well reduces the dried glue cleans the surface and does not have a persistent odor. In addition, alcohol will not damage the outer coating of the refrigerator.
When working with chemicals, wear protective gloves.
General tips for removing the stickers from the fridge
To get rid of unnecessary labels without harming the coating by using a hair dryer. To do this, you must carefully heat the dryer the surface of the door and carefully rubbing with a wet sponge. If the first attempt failed to remove the entire sticker, the procedure can be repeated.
Another way to remove stickers is to use an eraser. Using the cloth, you need to apply a small amount of the cleaning powder, and then diligently rubbing the sticker with an eraser. If necessary, the procedure can be repeated to remove adhesive residue. This method is quite time-consuming, but thus it is possible to remove not only the label but also stubborn stains that soaked into the layer of enamel.
With the remnants of the adhesive layer good oil. It is enough to apply a small amount of oil on a cotton swab and carefully handle contaminated site. The oil gently removes the glue and not harm the enamel of the refrigerator.