Advice 1: How to clean silver with cubic Zirconia at home

Almost every home you can find silver jewelry, decorated with today's popular cubic Zirconia. Unfortunately, over time their beauty fades, decorations darken and covered with an unattractive tinge. However, there are many ways to return to silver jewelry with cubic Zirconia original luster and beauty.
How to clean silver with cubic Zirconia at home

General tips



Contaminated dust, sand, sweat or cosmetics silver you can just wash in hot soapy water. Soap to replace detergent for dishes. After the product some time to sit in the soapy water it should be cleaned with a soft toothbrush. This method will not be able to bring back the Shine jewelry, but will help easily cleaned minor contamination in the home.

In addition, jewelry can be clarified by placing them in 10% solution of citric acid or ammonia. And if its warm, then its action will be more effective.

Copes with dirt potatoes. For the raw root should be grated on a grater and pour a small amount of water. The mixture need to lie down for a few minutes and then they're polished to a Shine with a woolen cloth. You can also hold jewelry in the decoction of potato peel, then rinse them in running water.

Cleaning silver from black



Blackened silver jewelry is easy to clean with soda solution. Put them in a bowl, covered with foil, sprinkle 3 tablespoons of baking soda, cover over with another layer of foil and pour boiling water. After 10-15 minutes, rinse them in cool running water.

Well removes dark plaque with silver following method. Prepare a small container and wrap it with foil. Then put an even layer of decoration, sprinkle salt and soda, add a few drops of dishwashing detergent and cover with boiling water. After 10 minutes rinse the product in a large quantity of cold water.

Well to clean silver the light side of normal office eraser. Just RUB a ring eraser and black will disappear. Instead of the eraser can be used lipstick. All due to the fact that the lipstick is composed of microscopic abrasive components are able to clean the silverwithout leaving scratches. To do this, apply it on a soft cloth and Polish the metal to the desired state. Then wash the jewelry with soap and water.

Very effective, but quite aggressive method of cleaning is to use the following composition. Mix until a smooth toothpaste or powder, soda, and ammonia. Soft toothbrush, apply the mixture, and then rinse with cold water. Toothpaste is good with strong black on silver, but often should be avoided because it can provoke the appearance of the metal micro-cracks. No soda this composition will be more gentle. A mixture of toothpaste, chalk, and ammonia also cleans silver jewelry with cubic Zirconia. The most important thing is to wash the product.

Advice 2: How to remove black silver

Silver is a wonderful metal for jewelry and Cutlery. He looks noble and has a disinfecting effect, which is important for kitchen utensils. But unfortunately, silver – metal sensitive, stains easily and darkens even with the most careful handling. In order to clean it from the black silver jewelry and return them to original appearance, you need to know a few simple techniques.
How to remove black silver
You will need
  • salt, baking soda, foil, vinegar, ammonia, toothpaste
Instruction
1
The easiest way to clean silver is ammonia. Decoration or clear the subject drop for a few minutes in a solution of ammonia. Then the usual toothpaste and an old brush to manually scrape away the toughest stains. As a result, the metal will Shine like new. However, this method has a significant drawback. Mechanical cleaning with toothpaste or detergent may leave on the product micro-scratches, which later will hide more dirt.
2
For gentle cleansing silver items you can purchase special cleaning solutions. Usually they are sold in jewelry stores in the departments of silver jewellery. Well-proven in this regard, detergents from Germany. The use of these funds will not have the power to scour the thing from stains, simply put it in the solution and soaking for a while. This detergent can be washed as the product of pure metal and precious stones. Damage to jewelry will not be any, moreover, after drying the cleaning solution creates a thin film on the subject, which will protect it for a while from darkening.
3
For silverware (Cutlery) are good old ways to clean with vinegar and salt. Items need to be put in a saucepan with a solution of salt and vinegar and boil.
4
If the product is very dirty and covered with stains at home you can use the following efficient method. On the bottom of the pan or enameled bowl put the metal foil, sprinkle on one tablespoon salt and one tablespoon of baking soda. Pour all the boiling water and put into the resulting solution darkened silver for a few minutes. Dark patina with silver items will go to the foil. Once that happens, things should immediately pull out, rinse with clean water and dry.
5
If you are the proud owner of old silver jewelry that requires special attention and careful attitude, when cleaning is necessary it is better to give a professional jeweler. A specialist will be able to remove stained plaque gently without damaging the surface of the object. And you don't have to worry about possible scratches or sudden stains.
Useful advice
The safety of silver depends largely on the storage conditions. Ugly dark patina usually appears at high humidity in the room. It is not recommended to store silver items of drugs or any drug containing sulphur.

Advice 3: How to restore Shine to silver

The soft sheen of the silver makes the products especially attractive. Over time, jewelry, silverware, and dishes start to darken. Silver will be shiny again and clean if you are using any of the suggested tools.
How to restore Shine to silver
You will need
  • Ammonia solution - 10%, alcohol, hydrogen peroxide, tooth powder or tooth paste, citric acid, baking soda, soft sponge, soft cloth rags.
Instruction
1
Silver jewelry and items with silver coating clean different. Silver-plated items require delicate handling, the friction can scratch or remove a thin layer of silver. For delicate cleaning use citric acid solution (100 g citric acid, 0.5 liters of water). Completely submerge the item into the solution and leave for 20 minutes. Silverware allow cleaning with a sponge. Silverware clean immediately after use with detergent and soft fabric motion forward and back. The remaining spots will remove with a solution of alcohol and hydrogen peroxide.
2
Jewelry made of silver darken faster because the contact with the human skin and air. The impact of the sweat, cosmetics, water lead to darkening and stains. Remove stains and blackening it with a soft sponge using a solution of citric acid (100 g citric acid, 0.5 liters of water), or soap and water solution of ammonia (2 tablespoons of ammonia to 1 liter of soapy water). If you allow the size of the product (chain, earrings, ring), soak it in the solution for 20 minutes.
3
With a strong blackening, use a slurry made from equal parts of ammonia and tooth powder or baking soda with a small amount of water. Apply the pulp on the product. Wipe the silverware with a soft cloth as long as the tissue will remain dark marks. Cleaned rinse the silverware under warm running water to remove residual cleaning products. Buff the product using a soft cloth and silver will regain its original luster.
Note
Do not use rubber and latex gloves when cleaning: the rubber contains substances for which silver products are covered by a dull coating. Do not use when cleaning abrasives, do not use sharp objects such as silver – soft metal.
Useful advice
Avoid prolonged contact of silver jewelry with water. Avoid getting makeup on the garment. Keep flatware out of silver in dry conditions in sealed bags, pre-wrapping them with clean paper or a soft cloth. Jewelry store in a box with soft padding.
Search
Is the advice useful?