You will need
  • For summer dresses:
  • - lightweight fabric;
  • - Laundry gum;
  • - the tape;
  • - tailor's meter;
  • - chalk;
  • supplies for sewing.
  • For evening dresses;
  • - dense fabric;
  • the pattern of the corset;
  • - lightning;
  • supplies for sewing.
If you just took up the manufacture of clothing, start with summer dresses. Suits, crepe, gauze, satin. Also suitable silk or fine fluid Jersey, but working with these fabrics has its own specifics.
Measure the length from the armpit to the bottom line. As for the other measures, then you need to know the approximate volume of the thighs to correctly choose the width of the cut. She needs to be more of a full hip. In this case, to calculate the amount of fabric you need to the length of the product to add 10 cm to the processing of the top and bottom and 5 cm on kulisku, which will be located on the waist line. Drawstring top can make a one-piece, simply sew the top edge. Dress will be one seam at the back. If the width of the cut is less than the volume of the thighs, the amount of fabric will have to double. In this case, the dress will work with two side seams.
Lay the piece on a level surface face down. Cut a strip for the middle kuliski. Divide the edges in half. Plotting points connect. This will be the waist line. She put off up and down 2 cm and a parallel line.
Prepare medium drawstring. Fold the long edges 0.5 cm on the wrong side and zautyuzhte. Baste drawstring, and then pristrochite. You can immediately handle top edge. Fold it in 0.5 and 3 cm and pristrochite. This can be done on the front side of the finishing line.
Sweeps and sostrochite back seam (or side two, if sewn from narrow fabrics). Hem the bottom. Insert the drawstring elastic clothes line. The dress is ready.
Evening dress better sewing of thick fabric – velvet or thick silk. For this, you need another pattern of the corset. It is best to order it in the Studio, since the production of such a pattern – it is quite labor intensive and also requires great precision.
Put the corset pattern on the graph paper. This pattern is usually made to the hip line, that is to the widest part of the figure. The pattern should be extended to the expected length of the skirt.
The calculation of the tissue is the same as for the first dress. Put the pattern on the wrong side of the fabric. Equity the thread should be positioned along the length of the product. The seam of the skirt and the zipper will be behind. Next, the operation procedure is as follows:
- sweeps undercut;
- try a workpiece;
- adjust the undercut;
- baste and sew the bottom part of the seam of the skirt;
- vsheyte zipper;
- handle the top and bottom.
This dress holds in the figure due to the cut. What is needed, therefore accurate pattern.