You will need
  • - tailoring meter;
  • - pins;
  • - paper patterns;
  • leather;
  • - dublerin;
  • - iron
  • machine, needles and glue for the skin;
  • - furrier or a box cutter (blade);
  • - threads;
  • buckle;
  • - fabric for covering furniture;
  • - scissors;
  • - the awl.
Find out the length of the future leather belt. For this measure tailoring meter coverage waist (for example, 60 cm) and provide a stock to tighten the accessory. Then prepare the paper pattern length 60х2, leaving all the edges of the seam width of about 1.5-2 cm is blade, the lower reserves will be necessary.
Basic cut out leather detail, placing the material in advance on a hard flat surface and securing it at the edges with sewing pins. Take action special making tool. It is permissible to replace the sharpened x-ACTO knife, or an unused razor blade.
Glue leather detail overlapping adhesive fabric. Dublerin cut to size belt, but don't leave a seam. Attach the lining adhesive layer to the reverse side of the leather items, carefully align the edges and press.
Wait until doubled leather fabric is completely cool - otherwise dublerin may not stick, and it threatens with deformation of the product. The seam on the cooled leather detail fold, prigladit nail or wooden ruler (not to scratch the "face" of the material). The hem lock glue for the skin and dry it at room temperature.
Leather fold detail in half on the center line and make a basting sewing pins, sticking them on future lines. Sew the belt on the sewing machine for leather, using a special needle. It is recommended to use an industrial model with a triple promotion with flat or cylindrical platform. Also suitable are popular among seamstresses universal mechanisms, such as the Janome MyExcel 23XE (if you use needles for leather).
Prepare the right size belt buckle. To fittings looked non-trivial, it can be covered by dense cloth in the tone of the main product or a slightly darker shade. For plating on two scraps of fabric paint over the external and internal contours of the buckle light dashes, adding them to the "face" to "face".
Prostrochite details on the planned inner contour lines and cut out the Central piece of cloth. Don't forget to leave some reserves for seams (about 0.3-0.5 cm), nadsekite corners. Also make the notch in the margin of one of the patches. Detail remove, put it inside the buckle. Shape of the hem and panel accessories. You will just have to see it in the finished leather belt and, if necessary, to be done with an awl the holes for fasteners on the opposite side of the product.