How to wash walls from the lime

Never apply a new whitewashing, and even more do not finish the walls with other materials, without deleting the old layer of lime. Wallpaper, paint, vodoemulsionku, the tile will not last long on the walls, which were whitewashed with lime, as over time the lime layer will flake off, which will cause a lot of problems. Finishing materials will fall off from the wall, and you will have to do re-repair.

Start to wash the lime from top to bottom. If you have it covered ceiling, first rinse the entire layer from the ceiling and then the walls. Rinse lime the usual warm water with detergent for dishes. First soak all the walls, leave on for 15-20 minutes, soak again and make an ordinary wash with a brush and rags. Dampen the brush with water and vigorously drive on walls, then dampen a rag with water and need regular flushing. Systematically rinse the brush and rag in clean water and change the water in the bucket. Have to do it very many times.

If the walls of a very large layer of lime, first remove a large spatula, then rinse the wall by the specified method, generate the alignment using putty, all thoroughly dry for 48 hours and proceed to the planned finish.

If you want to whitewash all the walls, enough to moisten the whole layer of lime spatula to remove all loose places, zashpatlevat and to re-whitewash. To remove the entire layer of lime to the plaster there is no need.

Before wash of lime cover the entire floor with plastic and a thick layer of old Newspapers. Otherwise, after you run a full wash of walls, you will have at least intensively wash the floor, soiled with lime, and this is a very difficult task. If you still have not provided this situation, it is to clean out lime floors add to hot water 100 grams of any vegetable oil, mix thoroughly, wash all floors, empty the water. Pour in a bucket of clean, warm water with detergent for dishes or any other degreasing agent and re-washing the floor.