You will need
  • it is a hairy cushion;
  • - wide spatula (scraper);
  • - hammer;
  • deep the pelvis;
  • - respirator.
Instruction
1
Move all the furniture in the next room or at least cover it with plastic wrap. If lime gets on upholstered furniture to remove it will not be easy. And rugs definitely will have to be removed to make them fail.
2
Carefully DAB the lime layer with water using a shaggy roller. Wait a while and let it run for a few times. This is to ensure that the plaster has begun to separate from the base of the ceiling, otherwise scrape it very difficult, and the dust will fly in all directions and enter the next room.
3
Take a wide putty knife or scraper and gently separate the lime from the ceiling. Just in case, wear a respirator, because the wetting of whitewash does not always help prevent the formation of dust which can get into respiratory tract.
4
When to remove the coating with a spatula does not work, lightly tap with a hammer on the ceiling. Then try again to remove the lime. You all should get. When all else fails, dampen the ceiling more, until the entire layer of whitewash will not get wet.
5
If you have a grinder (Bulgarian), you can skip all the previous steps and use it. However the formation of dust will be avoided, but to remove a layer of whitewash from the ceiling will get in just 30 minutes.
6
Wait until the ceiling dries out a bit, and treat it with primer. Fill imperfections and can start finishing other types of materials.