You will need
- newspaper or polyethylene;
- tray;
- - spatula;
- - the spray gun;
- - sponge;
- glue;
- protection sunglasses;
- construction of goats.
Instruction
1
If possible, remove all unnecessary from the room. Carefully cover the floor, window sills and remaining furniture with old Newspapers or polyethylene. Cover the door frames and window openings - spray from the lime very poorly washed. Wear work clothes, tie a scarf or use a cap. Wear protective glasses and gloves. Unplug the wiring at the repaired area.
2
Install construction goats. If not, you can use a stepladder or an ordinary table.
3
Wet a small segment of the ceiling, spraying hot water from a spray bottle. It is not recommended to wet the entire surface of the ceiling - most likely, while you clear one area, the liquid dries and you have to do the same work twice. Let the water soak in for at least 15 minutes.
4
Clean wet lime wash. To do this, take in one hand a tray, and a hard spatula. Removing with a spatula, the layers of whitewash, place a basin under the falling lime. To clean off the coating need very carefully, to its very foundations. If after the initial treatment on the ceiling is still untreated portions re-wet them using a damp sponge. Carefully, segment by segment, treat the entire surface of the ceiling.
5
Several times, rinse the ceiling with a sponge of large size.
6
After the work is completed accurately collect and throw the dirty Newspapers.
7
There is another, less time-consuming method of removal of lime whitewash. Take old Newspapers and carefully smear them with glue. Glue the leaves on the ceiling, leaving one corner not pasted. Allow the glue to dry. Dragging a corner, remove the newspaper from the ceiling with a stick to him lime wash. Several times, rinse the ceiling with water using a basin and a sponge.