You will need
- - instructions to receiver;
- is the needle file or knife;
- - screwdriver.
Start the installation with frame removal. Please note that the cover of the radio removed, after the frame. Otherwise be broken both parts.
Remove the frame without the use of excessive physical force and hands only. Not poddebice with a screwdriver or other tool because of the risk to break the fragile part. Removing the middle part of the frame under the unit climate control go to the bottom. Pull out the Cup holders and pull out the frame entirely.
Prepare a needle file to handle the installation place of the radio in the cabin. Initially it has a slightly rounded shape of the corners, which prevents the installation of non-standard receiver, for which you might want to handle the installation. You usually have to use a needle file to get the right angles. Work with needle files slowly, periodically trying on the radio. Processing needs to be done, when a new radio without resistance will go into the mounting hole of the cabin.
Pull the bundle of wires, which can be found under the climate control. If audio training have already been carried out earlier at the plant, further actions must be agreed only with the statement to the unit because the internal wiring is already prepared and only need to connect the wires in the prescribed manner, focusing on color and type of connectors.
If the machine is not prepared, guided by the color of the wires. The black wire will need to deduce the "-" battery terminal, and the yellow and red wires are usually used for "+". The remaining wires should be speaker. This again will help the user manual for the installed receiver, which prescribes the color of the wires for different speakers as well as the order of their accession.
Unscrew the screws to remove the pad and the piston. Attach the speaker with the help of special wires attached to the terminals. Turn on the radio and check the sound. If positive, repeat the process with all remaining speakers.
Advice 2 : How to install a radio on a Gazelle
In modern cars the radio is typically mounted directly to the factory, but often the standard device assembled from the factory does not support the required sound file format. So the minibus Gazelle owners are often forced to install new carradio with his own hands.
Before you install the radio on the Gazelle, remove the old appliance, installed in a production environment by the manufacturer. Using a screwdriver, gently loosen the frame of the car, and then very carefully remove with the audio device stubs. When you perform this action in reverse, you can damage both the plug and the frame of such equipment. Remove the frame by hand only without the use of excessive physical force, it is not recommended to hook a fragile item with a screwdriver or other tool, as an element of the receiver is very easy to break.
Remove located under the unit system climate control middle of the frame, and after removing this item already loosen the bottom of the details. To put the radio on Gazelle, get her the frame as a whole, put forward the Cup holders. Prepare the needle files that you will handle the seat, where the radio of the new sample. If when removing device you have noticed that the mounting place in the carthe radio is characterized by slightly rounded workers, it will first have to finalize.
With the help of a needle file to slowly handle the corners as long as they are straight, several times "trying" device into the mounting place. When the new radio will be free to enter into prepared for her hole, the processing can be completed. Pull the wires under the climate control, and then proceed with the installation of car radios. If the factory were necessary audiopreparation, it is recommended to read the instructions to the new radio so all the wires are in the right place and the device will only need to correctly disconnect.
In the case when the car Gazelle is not prepared for installing a car audio system, you need to focus on the color of the wires. In this case the black wire at output "–" to the battery terminal, and the red and yellow wires connect to the " + " icon. All of the remaining beam wire output to the speakers mounted receiver, and connecting wires according to their color usually clearly stipulated in the instructions to the audio device. Undo the screws, remove the piston and the pad, then using the attach speaker wire to terminals. Turn on the radio and check how well the new sound device, and then similarly connect the other speakers.