How to set channels on the satellite

Install and configure the antenna to the selected satellite, for example it will be Express_AM22 53е. If you're viewing satellite television on the computer to find the channels on the satellite you need a satellite DVB PCI or USB card Skystar 2. Furthermore, it should be installed on the PC ProgDVB, it still outperforms the competition in quality and reliability, it should be only the processor with frequency not below 1.5 GHz.

Open the tab "settings" and check the box next to your device, for example, the Skystar 2. In the same tab go to "DiSEqC and providers" and select the desired satellite, if you have tuned the satellite dish to multiple satellites or used motor for its rotation, then select all used or visible in your area. Accordingly, in the left pane and select the DiSEqC position.

Select "channel List". If you don't know what exactly you need the transponder, click on the drop down menu, "Blind search", the program will scan all available frequencies transponders on the satellite or satellites. In the case where the desired channel is not detected, use the sites www.lyngsat.com or www.flysat.com. Select the channel, record the settings of the transponder, from which it is broadcast.

Click the "List channels" select "Scan transponder", select the required satellite in the menu "Satellite", manually enter the frequency, polarization and speed according to parameters. Click "Commit". On the top is supposed to "run" two strips that show the "level" and "quality" of the signal.

Click "Scan". The left box will appear channels. Click the "Save" button and they will appear in the left part of the main window of the program ProgDVB. Open (FTA) channels will be highlighted in green, closed – red. Click on the outdoor television channel. The image will appear in the right window after 1-2 s. To view closed channels, you can use special plugins for ProgDVB: MD Yanksee, s2emu and vPlug. Configure the other channels on the satellite are produced in a similar way.