You will need
  • network;
  • boat;
  • - high boots;
  • - waterproof suit.
Before you put the network, you need to choose a place for fishing, to know what fish are in this pond, because it affects the appearance of the network and its mounting location.
Select the type of network to install. When the bottom is flat, clean, free of trash and possible snags, missing silt, then this is the perfect place for the production of conventional single-walled networks. If the location is found a large and strong fish, it network better to take with twisted fishing line. This scaffold tougher and stronger than usual, it may be less efficient because noticeable in the water, but it holds big fish.
Typically, such a network is szabadka you to cope alone. Wear high rubber boots, fasten one end of the network on the shore and help the network further along the coast, floats up, and weight down. Gradually straighten her, make sure she's not confused. Test network best every three to four hours so that the fish do not have time to sleep.
If the Bank is too small, the network must be set with the boat. In such cases, the use of long nets, with mesh so small fish are not caught in them. Put the network off the boat just the two of us. One of the fishermen is rowing while the second gradually cast a wide net. One to do this is inconvenient, especially if the river is over. Need to find efficient, for example, reed Cape, which will go into the Bank. Put out from the shore, determine the wind direction and put the network perpendicular to the coast. Thus the fish swimming along the Cape, be sure to get in your network.
If you need to catch a fish, you can not put the network for a long time, and smuggle them across the water like a dragnet. To do this, wear a rainproof suit and walk along the shore with one end of the network. At this time, the second partner in the boat will sail just a short distance from you, holding the other end of the network. So you walk along the shore and will come back with their catch.