You will need
- - a small knife;
- grinding skin;
- - solvent;
- - primer;
- - special gun or a syringe to apply the paint;
- - wet wipes;
- - paint;
Prepare the desired part of the bumper. Remove scratches, dust and dirt and be sure to wash it with any detergent or regular detergent.
Carefully use a knife to clean the damage from the peeling paint. After that, sand the scratch with a special skin. As soon as the surface of the bumperand become smooth, wipe it with a special solvent cleaner to remove the remnants of tar.
Cover the scratched part of the bumperand two layers of primer. To facilitate the procedure, it is best to use a special gun. First, evenly apply one layer, let it dry, and then repeat the procedure.
Wait until the primer is thoroughly dry, it usually takes about two days. Apply a special primer with sandpaper in order to eliminate defects and irregularities in the bumperie, Only do not overdo it, otherwise you will wipe it all to the ground. After you Polish the primer, thoroughly clean and degrease.
Before applying the paint, wipe the surface lightly with a damp cloth. Touch up the bumper you can use a regular small brush, or special tool in the form of a syringe. Spread the paint thin, even layer and wait about twenty minutes for it to dry. Then carefully apply the paint again, and wait until it dries. If the result does not suit you, then you can apply one or two additional layers.
Secure the result with varnish. It is better to put also in several layers.
It is recommended that during the entire operation to close the film the rest of the parts in order to avoid blurring. Before beginning the process is to take care of the room, cover the floor with Newspapers and then it will not get paint or debris.