How to take a bath at another place

There are several ways to move the bath. This will require technology services or welded frame of I-beam. The main attention should be paid to the preparatory process.

You will need

• - crane
• - trucks
• - slings
• - jacks
• - construction tool (hammer, axe, pry bar, handsaw)
• - winch

Instruction

1. If there is a need to move the bath, you can use one of several ways. For any of them, you need to consider every nuance of the buildings and the land on which it is located. In addition, of great importance for the success of the event plays the distance you want to move or move the bath.
2. If it is small in size and is a sturdy, good construction, better use of the crane-manipulator. But this method can be used only in the case when no wire of the power line which can interfere with the operation of the equipment.
3. The main attention should be paid to preparation for the transfer. At first you will need to remove from the roof of loose roofing material (e.g. slate). Then proceed to release the stove (if it is on the Foundation, and is not a common stove). To do this with her apart the floorboards so that when lifting built in oven passed freely through the hole.
4. From the room take out all removable items (benches, racks, basins etc.). Next, begin to disassemble the porch (if any). It is enough to disconnect from the bath in any way, as later it will be installed at the new location. The next step is "hanging" buildings. For this purpose, use the jacks that are installed in each corner of the bath. Alternately lifting the crowns, to achieve that height of the lower ceiling, to be able to stretch the straps. Upon completion of preparatory works in the process of entering the crane. With it, the construction of the lift and move it to the right places
5. There is the "American" method of moving buildings. The preparatory process in this case is similar to the previous, but the corners domkrat much longer. The bath needs to be lifted on such height that under it could drop platform autoplatforms. If the building can not withstand this procedure, and you experience a misalignment of the frame or cracks, it is better to use a crane. He carefully lift the bath and set it on the trucks. This method is suitable for those who need to transport a building in the distance.
6. You can move the bath without the use of technology. In this case, the preparatory process should be more thorough. If building is the Foundation, it is necessary to disassemble. Similarly we proceed with a porch or veranda. Then, under each corner of the bath set the Jack and raise it evenly. In advance you need to prepare the metal frame of the I-beam, the dimensions of which correspond to the perimeter of the building. It is necessary to get under the bath and lower it so that the floor joists were on the frame. Move construction is possible winches are secured using trees or other buildings.