You will need
- liquid for removing paint.
- - emery emery cloth;
- - spatula;
- - mineral fuel;
- grinding machine;
- - melt.
Instruction
1
The easiest way to remove the coating with a metal using a special liquid. If you don't have time to deal with removing the paint, it will be the best option for you. Buy at the hardware store, it can be both liquid and in the form of a dry powder that is diluted with water. To facilitate the search, contact the seller and ask for the fluid to remove the paint. As producers this means a lot of different names and then find them completely pointless. The seller will tell you information about all the funds that are available in the store. Method of application please read the instructions. Don't forget to buy mineral kerosene, because they need to wash off the paint and applied the tool.
2
If the precious liquid is not got you in the store, try to remove the paint with a spatula. But be careful, you can damage the surface of the metal, and the paint will fall unevenly. Remove only the surface layer and then smoothen the surface with emery.
3
Sander is also able to remove the paint. Put it on the nozzle with a secondary coating, enable the device to low power and start the procedure. Using the device you will remove the paint in just a few minutes. Do not forget to change the nozzle as plugging it in paint, otherwise it will cease to oshlifovyvat surface.
4
Use melt. If you do not have this tool, it ask from friends or buy in the store. Melt possible to take on hire, to do this, see the announcement in the newspaper. Turn on the device and hold it close to the metal. The paint will begin to otsenivaetsya, and you will just have to take it off with a putty knife or iron brush. Do everything very carefully, because the iron heats up, and you can about him accidentally getting burned.
