You will need
  • - citric acid or lemon juice
  • - diluted vinegar
Instruction
1
Clean the iron using citric acid. Dissolve in boiling water, the crystals of citric acid and pour the liquid into the iron. Heat the iron, turn the steam generation, and miss a few trickles of steam and turn off. Repeat manipulation several times. Instead of citric acid you can use lemon juice, diluted vinegar, and special tools in order to clean iron from scale.
2
During the production of steam be aware, the substances give a very acrid vapor, which can hurt your body. It is better to make all manipulations in the fresh air (balcony, terrace) and above the pelvis, where to pour water and pieces of scale.
3
Use the self cleaning iron. Some models of irons is equipped with the function of cleaning. Pour water into iron, heat it to maximum temperature and wait for the auto off. The water should be clean and soft. In some models of irons , you need to pour only distilled water, other irons it is a contraindication (see instructions). Wait until you re-enable it after second take off the iron, tip it holes for steam outlet down and turn on the clear button. In the end you can slightly twist the iron, pouring the remaining fluid.
4
Arrange the iron "bath". Prepare a wide bowl (to fit the sole of the iron). Pour boiling water and add a special powder to clean from limescale, the vinegar or citric acid. Put the sole back down and leave for a few minutes. Then repeatedly press the button to release a pair of pre-Bay in the iron liquid. If the basin is to use a heatproof dish, then the entire structure can be placed on the stove to the water in the tank is constantly heated – so your iron will be cleaned faster and better.