How to disassemble the camera

Having trouble with choosing a suitable digital camera, especially not in a hurry to relax. The situation in the goods market is that from buying a "pig in a poke" no one is immune. Even manufacturers of reputable brands of digital technology, you can expect surprises. For example, a key flaw of the machines CANON is that the lens design did not have protection from dust on the inside of the lenses, and it means that you have to disassemble the camera

You will need

actually camera, Phillips screwdriver, tweezers, a soft cloth for optics

Instruction

So users with a list of other failures that are impossible or too expensive to repair at service centers. Because this is a homegrown craftsmen, we are able to rectify the fault, or at least try.

So, if you decided to disassemble your camera, here is a sample schema for Kodak. Unscrew all the screws, first remove the back panel, carefully disconnect the ribbon cable leading to the LCD display, then the front.

Then Unscrew the Central charge, remove the memory card, chassis with battery compartment, remove the matrix, and then the optical unit. Discharge the capacitor, take the flash unit. Here is a humble list of all components for this machine.

If you want to Tinker with the optics. But, without proper experience or education, it is better not to get involved. Also, consider the ratio of the level of your knowledge and the complexity of the design. In principle, a detailed diagram of detail described in the instructions to each camera.

Note

Remember that if your machine is under warranty, and you opened it yourself instead of having to refer to a certified service, the warranty is automatically canceled. The risk of all damages are borne exclusively by you.

Useful advice

Be especially careful with optics, do not touch the lens with your hands and rubbing. If, however, your fingers will remain on the glass, use the special sprays.

Is the advice useful?