How do I clean the glue on the glass

Traces of glue on the glass may remain after renovations or stickers from the manufacturer. Try to remove the stains as soon as possible. Otherwise, then scrub the glue will be harder.

You will need

Liquid dishwashing, ammonia, gasoline, kerosene, mineral spirits, acetone, windshield wiper.

Instruction

Prepare the following solution. Mix 1 teaspoon dishwashing detergent and 1 tablespoon of 10% ammonia. Apply the solution on the contaminated area of the glass and leave for 1 hour. During this time periodically to moisten the stain. When the glue is softened, carefully remove it with a utility knife or other sharp object.

Buy at an automotive store or petrol station wiper. Apply the product on the stain and wait a few minutes. Then remove the glue with a utility knife.

If you didn't have the wiper, use gasoline or kerosene. Dampen a cotton ball in the solvent and attach to pollution for 15 minutes. After that time, scrape off the glue with a razor blade knife.

To clean the glass from the glue spots, you can use acetone, mineral spirits or liquid Polish remover. Apply the product on the contaminated place and wait a while. Remove traces of glue with a scraper or razor blade.

Fresh stains from white glue, gently remove the paper towel. Then wipe with a sponge dipped in clean warm water. Wipe dry with a cotton towel and Polish. Inveterate stains before removing the need to soften. Therefore, apply to the contaminated area with a little dishwashing detergent diluted with water, and leave it for a while. Then wipe the glass with a soft cloth.

After the glass is completely cleaned, wash it. May be used for this wiper. Evenly spray onto surface, wipe with a cotton towel and buff to a Shine with the microfiber cloth. May also dilute ammonia in water - 1 tablespoon of ammonia in 5 liters of water.

Is the advice useful?