You will need
  • - Hairdryer
  • - window cleaning;
  • - rag;
  • brush;
  • - Laundry soap;
  • blade;
  • - sharp knife.
Instruction
1
Heat the foil with a Hairdryer. This will help you to easily remove tint with glue. Use the building hair dryer, but if he was not at hand, then fit and normal. It is not necessary to apply a temperature above forty degrees - you can melt the film. Try to evenly heat the film gently pry her blade and remove.
2
Hold the dryer at a distance from plastic parts, do not need to be tightly pressed against glass, as it may be damaged or even crack. If performed correctly, the actions you have after removing the film on the glass will be minimal amount of glue.
3
Carefully with a razor cut away the remaining layer of glue, try not to scratch the glass surface. You can also try to scrub the adhesive with detergent. Perfect oily substances, can be used acetone. But keep in mind, acetone is a sharp and unpleasant smell, and if he gets on other car parts - can be spot. When using the solvents requires special care and caution.
4
Apply a solution of detergent and water on the glue residue and wait until completely dry. Then cover the foam once the entire surface by means of "rough" material attrite glue. Wipe the glass dry with a clean cloth.