How to draw on water

First you need to prepare the paints. Dissolve them with a solvent, self-regulating consistency. In a separate small container with water, ensure the correct consistency. Drops in contact with water, should not fall to the bottom of the tank, their color should remain intense enough.

Think carefully about the picture you plan to draw. Your desired hues by mixing the primary colors prepare in advance. Oil paints in water are not miscible, and therefore to get the desired color in the drawing process will not work.

In a large capacity type fresh water. The size of the container choose based on the size of the paper onto which you will transfer the pattern.

In the beginning the whole process of drawing you can create a common background pattern. Gently brush spray paint the desired colors on the water. To paint, rasteksheysya on the water surface, acquired a distinctive marble patterns, water needs to be shaken. According to the technique of painting water, it can be stirred with a brush after applying the paint, you can blow on water, dispersing the paint. You can also hand a little water, shake well before applying the first drops of paint. At this stage you can adjust the intensity of the background, and also combine several colors of paint.

After applying the background you can go to the main picture. Drawings of worn brush in the form of drops. Combining the necessary color and placing a drop at the right distance from each other, they shaped, divided or mixed. To shape used clean brush. Paint a drop can be placed directly on top of each other. Due to the fact that they are not mixed, have an interesting combination of colors. In the same way are created and the contours of the drawings.

After the drawing is ready, you can proceed with transferring it to paper. It is desirable that it was watercolor. May give preference to the different type of paper, but note that its surface must be rough. This condition is mandatory, otherwise, the picture may not transfer to the paper. The face sheet lay on the surface of the water. Take the brush and its not flushing the paper, smooth the sheet to the water. Thus, treat the entire surface of the paper. Edge of the sheet then carefully pry with a sharp object and took it with both hands, lift the paper completely. A figure lay on a hard, flat surface and leave to dry.