You will need
- - 4 metal tube with a length of 1.5 meters;
- - 2 metal tube with a length of 1.7 meters;
- - metal parts with a length of 1 meter, on which there are holes for screws;
- - welding machine;
- - screws;
- - the drill.
To install a homemade parallel bars in the home have on the wall, but because it must first prepare. To do this, put the right corner to the bottom so that one face was on the floor and the other on the wall. Then mark with a pencil the places on the wall for the screws.
Attach the second angle at a height of 1.5 meters from the floor so that its edges are located directly above the first area. Mark the holes for the screws at the top and bottom, drill them. Weld the pipe length of 1.5 meters to one of the metal corners on the edges. Then weld to the edges of the other of the remaining two tubes at 1.5 meters.
To the designs you want to weld pipe with a length of 1.7 meters so that one facet of the area was attached to the wall, and the other two were pipe length of 1.5 meters. One piece 1.7 metres weld to the left the pipes that are fixed on the corners, and the other to the right.
Making homemade bars, secure them to the wall with screws. You can add your design soft handrails and backrest, so that you have the possibility to download the press and avoid getting calluses on the palms.Now you know how to make parallel bars at home and can train even in the winter time.
It is important to remember that you should not make homemade bars of wood. This design can break, and you risk this injury to earn.
If the metal parts you want to use for making homemade bars, no holes, do they drill.