You will need
  • - to play;
  • - a personal computer.
To check the settings, open the tab "control Panel", locate it using the "start" button. In the menu you will need the icon "Modems". Check the model of the modem, the correctness of the title. If these data do not match with the installed equipment, start the "add hardware Wizard". Make sure that the modem was connected - the device automatically detected.
If you see the list of devices, select the modem with the appropriate to your name, click "Add". If your modem was not, try to install the driver compatible devices. Test it, the name of your modem should appear in the device list. Remove from list once, otherwise, between the drivers that can cause conflicts.
Ensure availability of equipment. Click on "control Panel", then click "System" and look for the line "Device." Select the installed modem and click the right mouse button. In the context menu look for the line Properties. Check "Security", "Network", "Access" and verify that the device works, plug it in.
To check the port settings, click "Modems", select your device and click "Properties". Next, click on the line "add connection" and verify the current port settings, view name and data transfer rate.
Check the settings of data transfer rate in Modems tab, click your device, select the line "Properties". Next, go to the menu and select the "General" tab, set the transmission speed in accordance with the capabilities of your modem. The values find in the user manual supplied with the device.
Click the icon "My computer" the right mouse button, select the line "Properties". Next, go to the menu "Equipment" and click on the tab "device Manager". The installed modem will appear in the entry for "Modems". Please note, the name and type of the modem must match the settings of your equipment.
Click "Properties" right click the "General" tab. Here you can see information about your equipment, you can enable or disable the device.
If the equipment is working, start Troubleshooting. Basic data about the driver is located in the tab "Modem", you can update it or roll back to a previous version.
Note the tab "Additional parameters of communication". By setting the initialization string, you will ensure the adaptation of the modem to a specific channel. Settings needed for USB tethering. Next, go to the menu "Diagnostics", check the modem settings by pressing the button "Query modem". The modem information will be displayed at the bottom of the window.