You will need
  • -spray paint;
  • -protective film;
  • Polish
First, find the room. It should be spacious, not ventilated (i.e., must be the lack of any wind), also there should not be dust.
Guide surface preparation for painting. Sand and Prime the repaired area, degrease it. Then glue the remaining parts and details of special protective film or paper. Need to paint did not get on the not repaired parts.
In addition, pick a paint color. This can be done by computer selection. If you are not sure, consult the sales consultants automotive store.
Next, start painting the car. Shake the spray paint for 2-3 minutes. This will help to mix it correctly. Then do a test. any iron parts. Need this procedure in order to understand the force with which spray paint and a thick layer is obtained.
Paint spray equal to 30 cm is Necessary to cover the surface with thin layers of paint. As soon as I applied one of them, let dry 10-15 minutes. Then re-apply paint. Make three layers.
After you complete the painting and give the last layer to dry, cover the repaired item with a colourless varnish-fixer. It dries in 30 minutes. Now the procedure of repair can be considered finished.