Advice 1: How to change value of keys

As a rule, all personal computers, the keyboard layout is standard. For each key defined on itsvalue. For example, the bottom left key on the keyboard prints a letter "I". But not all people fit into a standard frame. Someone, perhaps, not very convenient to put the decimal point, press simultaneously two keys. Much easier to put the right symbol in one click.
How to change value of keys
You will need
  • computer;
  • keyboard;
  • program InetliType Pro;
  • - the Internet.
Instruction
1
Therefore, there is a simple way to change the value of keys on any standard keyboard. For this you need to enter through the "start" button in the control panel and choose the tab "Keyboard".
2
You will see a window where you must select the tab "customize keys". In the opened window you can view the list of those keys, a reconfiguration which is available without a special program. Choose from the list key press the "Set". Then follow the prompts of the computer. However, keep in mind all the changed keys, as later easy to get confused. To start write them down on a piece of paper.
3
To change the value of other keys not listed, you need to run the program InetliType Pro. If you do not have this program, you can download it from the official Microsoft website www.microsoft.com. In the opened tab "key settings" check whether the specified keyboard model. To make this operation is necessary because the set of keys, the value of which can vary, depending on the model of the keyboard.
4
If there is not specified your model, click on "Change". Locate the desired keyboard and click "OK". The name of the keyboard view on the front side or the back. Usually the name is on the front side of the keyboard at the bottom.
5
Open the dialog "Reassign a key", choose a new value key. Click "OK" to confirm the selected command. Now the value of the key is changed. But changing the value of keys is not always possible. This depends on the operating system installed on your computer. For example, Windows Vista does not provides, so you should pay special attention to this factor.
Note
The value of the keypad buttons. On the keyboard, with which we print, the text is quite a lot of buttons. Each of these buttons for something needed. In this lesson we will look at the keyboard and remember those that are useful to us for working with text. Keys of the keyboard. Esc Key. The full name of the Escape (pronounced "Escape") and it means "Exit". With this button we can close some programs.
Useful advice
But knowing the value of each button are completely optional — most people decades using the computer and have no idea about any of these buttons. And You also can not pay attention to them. On many keyboards the numbers are still on the right side. They located exactly the same as on the calculator, and for many people more convenient. It so happens that these numbers are not working. You press the number, and it is not printed.

Advice 2 : How to change value of keys

As a rule, all personal computers, the keyboard layout is standard. For each key defined on itsvalue. For example, the bottom left key on the keyboard prints a letter "I". But not all people fit into a standard frame. Someone, perhaps, not very convenient to put the decimal point, press simultaneously two keys. Much easier to put the right symbol in one click.
How to change value of keys
You will need
  • computer;
  • keyboard;
  • program InetliType Pro;
  • - the Internet.
Instruction
1
Therefore, there is a simple way to change the value of keys on any standard keyboard. For this you need to enter through the "start" button in the control panel and choose the tab "Keyboard".
2
You will see a window where you must select the tab "customize keys". In the opened window you can view the list of those keys, a reconfiguration which is available without a special program. Choose from the list key press the "Set". Then follow the prompts of the computer. However, keep in mind all the changed keys, as later easy to get confused. To start write them down on a piece of paper.
3
To change the value of other keys not listed, you need to run the program InetliType Pro. If you do not have this program, you can download it from the official Microsoft website www.microsoft.com. In the opened tab "key settings" check whether the specified keyboard model. To make this operation is necessary because the set of keys, the value of which can vary, depending on the model of the keyboard.
4
If there is not specified your model, click on "Change". Locate the desired keyboard and click "OK". The name of the keyboard view on the front side or the back. Usually the name is on the front side of the keyboard at the bottom.
5
Open the dialog "Reassign a key", choose a new value key. Click "OK" to confirm the selected command. Now the value of the key is changed. But changing the value of keys is not always possible. This depends on the operating system installed on your computer. For example, Windows Vista does not provides, so you should pay special attention to this factor.
Note
The value of the keypad buttons. On the keyboard, with which we print, the text is quite a lot of buttons. Each of these buttons for something needed. In this lesson we will look at the keyboard and remember those that are useful to us for working with text. Keys of the keyboard. Esc Key. The full name of the Escape (pronounced "Escape") and it means "Exit". With this button we can close some programs.
Useful advice
But knowing the value of each button are completely optional — most people decades using the computer and have no idea about any of these buttons. And You also can not pay attention to them. On many keyboards the numbers are still on the right side. They located exactly the same as on the calculator, and for many people more convenient. It so happens that these numbers are not working. You press the number, and it is not printed.

Advice 3 : How to change the letters on the keyboard

Keyboard computers and laptops are designed to provide convenience and speed when typing. Proper organization of the working space and convenient location of the keys will provide quick and quality work of the user.
How to change the letters on the keyboard
Instruction
1
In order to save space, computer keys are multifunctional: the same buttons in certain combinations can have different values. Look carefully on the keys of your computer. Each of them contains 2 and more characters, and they have different colors. In the upper left corner are the letters of the Latin (English) alphabet, and punctuation and waterstove signs that are activated after the transfer of the keyboard to the English layout. In the lower right corner of the button caused the value it has when the settings of the Russian language. Please note that this feature applies not only to the keys with literal values, but also to the digital keyboard.
2
To change the language in which to print your text document, press "Ctrl+Shift". On some computers the action to change the layout of the keyboard perform Ctrl+Alt". It does not matter, you use these buttons on the right of your keyboard or the left, they are identical.
3
To change the letters on the keyboard using the mouse. On the "taskbar of your computer, near the platform hours is the window of the change of language – "the Language bar". It is written "EN" or "EN" depending on the currently installed values. Click with the left mouse button on the "Language bar" and in the opened context menu select the language that you need right now. Click on the desired value with the left mouse button. Next to him will be a special box, and the keyboard will start typing in another language.
4
In computer games the most important and, their settings allow you to change the value of the home buttons. As a rule, change the command keys in the "Settings" or "Manage" your game.

Advice 4 : How to change the buttons

Sometimes when buying a new keyboard, we find that the keys are located in unusual order. This is especially true of the keys of the laptop. To change the assignment of keys on the keyboard by using special software.
How to change the buttons
Instruction
1
Click the "start" button, go to the main menu, select "control Panel" and double-click on the icon "Mouse". In this menu there is the possibility of changing the assignment of keys of the mouse. When displaying the submenu in a category first select "Printers and other hardware" then "Mouse".
2
In the window "mouse Properties" go to tab "mouse" Button, then click in the box "Config buttons". It is possible to configure the mouse to control the left hand, to do this, select the check box near the item "Exchange assign buttons". Then click on "Apply" and "OK". Now assign keys on the mouse are reversed.
3
Open a browser, go to http://aescripts.com/keytweak to download from official manufacturer's app for changing the assignment of the buttons of the keyboard KeyTweak. Wait for program installation file and install it on your computer.
4
Launch the app KeyTweak from the main menu to change the assignment of buttons of the keyboard. In the program window, select the key you want to reassign. Further, the lower part of the program from the list, select the character you wish to set for this key, click Remap key.
5
To return to the original configuration, use the Restore Default button. You can also choose other destination key from the list in the right part of the program, for example, to assign any key function the computer turns off, click it in the program screen, then select the button that represents the monitor that says Power Off.
6
Similarly, you can assign a sleep, calling the Windows "My computer", "Calculator", "Conductor" controls the browser and the audio player. In the upper part of the program will show all changes you made to the buttons of the keyboard. If necessary, cancel their return to the default settings.

Advice 5 : How to assign buttons on the keyboard

In Windows operating system and many programs to perform various operations using keyboard shortcuts. They help the user to perform the desired command faster and it does not move the cursor to the opposite side of the screen. To assign buttons on the keyboard can be different.
How to assign buttons on the keyboard
Instruction
1
Part of hot key functions the same in all applications. For example, to run the Copy command ("Copy"), use Ctrl and C to Paste (Paste) – Ctrl and V. and Even the buttons on some keyboards, have the appropriate signatures, to decide whether they should reassign you.
2
To configure the hotkeys in Windows operating system often require installation of additional software IntelliType software from Microsoft. Once the utility is installed, open the "Keyboard" through the "control Panel" and set the appropriate settings in the desired tab.
3
To remap any key on the keyboard, you can use third-party applications, for example, MapKeyboard. Install the utility on the computer, start it. Keyboard will appear. First, press the wrong button you want to replace using the left mouse button. Next, in box Remap selected key to select a new key and save the settings, click Save layout. Then restart the computer.
4
To assign some keys you can use the properties window of the corresponding system component. To assign other keys to change the keyboard layout when typing text, call via the menu "start" "control Panel" and in the category "date, time, language and regional options" select the icon "regional and Language options".
5
A new window will open. Go to the tab "Languages" and click on the "More" button. In the advanced window click on "keyboard Settings" tab "Settings" and in the next appeared window click on "Change shortcuts".
6
In programs where the use of hotkeys to invoke various tools, to replace them is much easier than in the case of system components. Run the application and go to the menu "Settings" the item "hotkeys", "hotkeys", "Capture" or something similar in meaning. In a specially designed box, enter new shortcut key (or press one key) and save the new settings.

Advice 6 : How to change the function keys

The functions of the individual keys and key combinations that are set in Windows by default, not always satisfied users. On Microsoft there is a possibility to change the function of some keys and make amendments in the registry, however, these opportunities are very limited. Those who want to radically change the functionality of its keyboard, adjusting it work optimally for you, you must resort to third party programs.
How to change the function keys
You will need
  • – a PC running Windows;
  • – access to the Internet.
Instruction
1
One of the best free apps for reprogramming the keyboard is Mkey. Go to the website http://www.seriosoft.org, download program to your computer, and install it. When you install Mkey change the keyboard driver on their own and completely subjugates the keyboard operation.
2
If you wish to change the function of some keys, open the program window and menu Keys. Right-click the mouse in the left area of the window and select "Add". After the appearance of the dialog box, press the key, the function of which you want to change and enter into the form any name for this keys. Confirming your decision by clicking "OK" select in the Central zone of the window one of the actions which you wish to assign to the key. Confirm your choice by pressing the Save icon in the lower right corner. Since that time, the selected key will perform the assigned function.
3
For those who want to radically change your keyboard, you can suggest the next option. Purchase a multimedia keyboard with buttons that control the player. Click on the keyboard button that you do not use in normal operation. It can be keys keypad (to the right on the keyboard), some function buttons (F1, F2 etc) keys Scroll Lock, Pause Break, and others. Along with the multimedia number of keys that can be reprogrammed without any damage to the work, may be several tens.
4
With this program, Mkey, set these keys for special functions. This can be launching most used programs and a variety of actions (cut, copy, refresh, paste, move across the tabs to connect to the Internet, etc.). Unlike the system shortcuts managing them will be one click that is much easier and faster than doing the same thing by pressing two or three buttons.
5
To quickly learn new function keys, stick them on the appropriate icons with tape or stickers for the keys. As a result of these transformations, your keyboard will gain exclusive functionality that best meets your requirements. The speed and ease of operation on the keyboard will increase significantly.
Note
In the Mkey is not subject to reprogramming only Shift, Ctrl, Alt, and Win.
Useful advice
Except Mkey, there are other programs to change the functions of keys – for example, KeyRemapper, KeyTweak, Hot.Keyboard. However, some of them are paid, not exceeding in this case, the Mkey functionality, the other inferior to it in its capabilities.

Advice 7 : How to remap keys on laptop

Reassigning keys the notebook is used for easy configuration of keyboard settings to suit your needs and make work more comfortable. On a laptop keyboard cannot be replaced, and therefore to change the functions of buttons you can use specialized software.
How to remap keys on laptop
Instruction
1
One of the most popular and easy to use utilities for remapping keys is a Keyboard Map. With its intuitive interface you can change the function of any buttons on the keyboard. This utility can be used on any laptops running the operating systems of Windows starting with XP.
2
Download the software from the Internet. She does not have an installer and distributed in the form of files. Extract the RAR file using the program WinRAR, clicking on the package with the right mouse button and clicking "extract to current folder". Navigate to the resulting directory and run the file MapKeyboard.exe.
3
In the utility window you will see a picture of your keyboard. Left mouse click on the button you want to change. Then at the bottom of the utility window click on the Remap selected key tools. In the drop-down list, select the key you wish to change the selected button.
4
After remapping keys, click Save Layout in the lower right corner of the program. Confirm your changes and restart the system by pressing "Yes" in the dialog box that appears. If you want to reset manufactured settings, click Reset keyboard layout.
5
In addition to Map Keyboard there are a large number of other programs with which you can change the desired buttons. So, among the other free utilities you can mark Key Remapper that works in a slightly different way.
6
After downloading, install and run the utility you will see a window divided into two parts. To set the key you want to edit, click the drop-down list under the "Source key" and select the name used buttons. If not, click "New key" and press the key you want to change.
7
In the list on the right side of the window in the drop-down context menu, select the button to which you want to replace function. After that save the changes by clicking on Apply and restarting the computer.
Is the advice useful?
Search