Instruction
1
The hard drive in the laptop has a smaller size than a conventional computer. And not only because of the smaller dimensions of the mini-computer and system requirements. All the stuffing laptops designed for small memory and low speed of its transmission. Because significant amounts and quick operation creates inside a compact device of high temperature, which ultimately affects the reliability of the entire computer.
2
In addition to the above, it is necessary to note another difference between the winchesters for notebooks is the technology of reducing energy consumption. When contacting a Winchester no, the computer goes to sleep, turns off the monitor screen.
3
And yet it is possible to change regular hard drive to best data. It doesn't have to be super large hard drive (a maximum of 20-30 GB and a speed of 4200). To install it you need to pull out of the laptop's original hard drive.Power off the laptop. Flip the lid down, turn the lock-screw of the battery 90 degrees clockwise with a screwdriver. Disconnect the battery.
4
Look on the back of the laptop a small cap somewhere 8x12 cm, which is drawn in the cylinder. This cover is attached with two screws. Keep in mind that on some laptops there is no marking. Then you should open all covers on the rear panel.
5
The hard drive is inserted into the connection interface of the laptop in a special metal skids. If the slide is screwed to the body of the laptop, they should be unscrewed. If the skids are not screwed, you just need to pull the plastic tab on the sled of the hard drive side (the side opposite the connector) and pull out the Winchester from the connector.
6
Remove the four screws that secure the sled to the hard drive, remove them. Metal sled you will need when installing a new hard drive.
Useful advice
Do not use for removing the hard drive from the Jack, screwdriver and other tools, as they can damage the connector or the laptop case.