You will need
  • - material particleboard;
  • - plasterboard;
  • sealant;
  • tape;
  • - polyurethane foam;
  • tape;
  • - anchors;
  • - corners;
  • - hooks;
  • plastic;
  • - handle;
  • glue.
Before you start building, decide what size will be your locker where you will hang the form and want to do. It is best to combine the functions of the Cabinet and mirror, aligning them at the factory. Select a color and start assembling all of the details that you need to prepare in advance.
Can be masked using the locker in the toilet niche with the drain and sewer pipes. To do this, take the drywall and attach it where the pipe is located. This will help to disguise them from prying eyes and give the toilet a beautiful look. For the Cabinet, use a laminate, it can make the shelves, canopies.
Sawed with a hand saw chipboard to the desired size and hang parts on the wall. Places where there are cracks, you need to cover it with sealant or foam and leave for a while. Fasten components with screws or nails. Attach the doors with corners and drill bit of a drill secure the handle. Saw out the shelves and use the strip glue the whole Cabinet. Usually glue the shelf with holders or corners. It is best if you attach the doors at the last moment. Then you can safely set up shelves and fix a Cabinet on the wall exactly. By the way, often the wall has an uneven surface, in this case it should smooth out with drywall or putty. Such works should be performed at least two days prior to the manufacture of the Cabinet in the bathroom.
In the wall locker, which is attached to the wall of the toilet, you need to drill holes for pipes, if they are not covered drywall. It is best if the entire Cabinet will be made in one color with tile of the walls. In this case, the combination will be the most harmonious. The locker can be lined with plastic then it should be done in advance, stitched every detail of pre-plastic.