How to turn the wipers on

You must correctly use the wipers (the wipers). With proper use of a windshield is always clean. The main assistant in cleaning the glass is a window washer. Control of the washer pump and wiper motor are performed by one lever.

Instruction

Turn on the ignition.
To enable the wiper slightly move the lever up. The lever always returns to its original position. To increase or reduce the speed of the wipers, move the lever up or down respectively.
If the vehicle provided by the automatic control device wipers with rain sensor, to enable this mode slightly move the lever up, then turn on auto clear control with rain sensor. In this mode, the rain sensor determines the amount of water on the windscreen and automatically regulates the speed of the wipers.

To activate the wash mode, slide the lever forward and hold. On most vehicles, the wipers start to work automatically. The longer you hold the lever, the more strokes do the wipers.

The inclusion of a rear wiper (the wiper). To activate wiper, slide the lever forward. The rear window wiper operates in periodic mode. Turns on automatically when the windshield wipers and reverse gear.
To activate the wash mode, slide the lever forward and hold.

Note

Do not switch on the windscreen wipers or automatic wiper with rain sensor in an icy glass, as it can damage the brushes or the control system. Turn on the heated windshield.

Useful advice

1. On cars with rain sensor is necessary to monitor the cleanliness of the sensor window.
2. Once a year you need to replace brushes.
3.Contaminated brush clean with a soft cloth using a cleaning agent and antifreeze funds.

Is the advice useful?