Instruction
1
Any carpet, especially natural wool, – a thing quite heavy, so hang it on the wall you must use special fasteners. In most cases, this mistress just purchased in sewing stores so-called carpet rings – metal rings provided with legs with slits for the yarn. Sew them at equal distance apart around the upper edge of the carpet.
2
When all the rings firmly sewn, with a ruler on the wall and mark the corresponding points, which are driven cloves. Then they hung itself carpet. This is the most common and easiest way to hang a rug on the wall, but not the best. First, at this port the wall because nails require a lot, secondly, over time, the carpet begins to SAG between the fixed rings and to gather into folds that are very difficult to destroy.
3
. A more gentle way to hang a rug on a wooden rail. To do this, at the top of the walls of the drilled holes at a distance across the width of the carpet. They clogged the tubes, which, in turn, with screws attached a wooden rail. The rail driven small nails at a close distance from each other, and on them hung himself the carpet with the help of numerous carpettion rings. But this method is only suitable for brick house, in which it is possible to drill the wall.
4
If you do not want to hang carpet with rings for fear that it will have folds and wrinkles, you can use nylon thread and steel wire. To this end, the upper edge of the carpet from the inside prostragivajut nylon thread so that the stitches size does not exceed 50 mm. Through them is passed a steel wire, which in turn throws the carnations, enshrined in the rail. The weight of the carpet is automatically evenly distributed on all the nails, and the carpet will not have any folds.
5
If you really don't want to spoil the wall, any holes can be drilled holes for the dowels in the joint between the wall and the ceiling. On the dowels to secure durable, the fishing line stretched tight, on which to hang the carpet.