You will need
  • - Bicycle;
  • - petrol or electric motor;
  • - wrench set;
  • - screwdriver;
  • - sheet steel;
  • - welding machine;
  • - fasteners.
Instruction
1
Prepare the bike for installation of the power unit. For conversion to a moped is not suitable for every two-wheeled machine. So rate the strength of the frame, and front and rear forks of the Bicycle. These items must be completely intact, have no flaws and strains.
2
Because the upgraded bike will have to carry additional weight, consider the installation of wheels of a motor scooter, capable of withstanding considerable loads. Perhaps, for this you will have to mount a wider front fork. Provide also fork shock absorbers from an old moped. In some cases, it is sufficient to equip future moped wheels from bike terrain.
3
Choose the right engine. Best suited for a scooter power unit type D-6, which can be removed from old bike. If you plan to use the motor, you will need additional space for installation of the battery; the motor and battery in this case will strengthen for the driver seat, the trunk.
4
For mounting the gasoline engine to reinforce the frame, making the base of sheet steel. The base of the weld to the frame in a place of fastening of the propulsion system, the above Cycling of the carriage. To tight so the frame using bolts, nuts and special clamps to securely attach the engine.
5
The rear axle of a Bicycle wheel equip additional gear. Connect the engine sprocket and gear chain, be sure to adjusting its tension. To transfer force from the motor use a timing belt and pulley.
6
Install handlebar grip throttle control and clutch, connecting them to the engine by flexible cables. By adjusting until the clutch is fully depressed when the lever is worked fully to prevent unwanted wheelspin.
7
Be sure to equip your bike braking system. It is necessary for the efficient management of a vehicle capable of significant speed. It would be best if you install the upgraded bike front and rear brake.