Advice 1: How to increase the sound volume on the computer

The sound on any computer is governed not only by the regulator on the sound column, but also various software. If the column you turned the controller on max but the sound volume is low, then most likely you need to configure it via software.
How to increase the sound volume on the computer
You will need
  • - computer with Windows.
Instruction
1
The easiest way to increase the volume of the sound is. In the lower right corner of the screen there is an icon column. Click on this icon right-click. A context menu will appear. In this menu, select "Open volume control". On some operating systems may be "Open volume mixer".
2
Then select "Dynamics". There is a slider. Move the slider to the top as possible. Close the window. Now try increasing the volume using the slider on the very dynamics. The sound volume should be much higher.
3
It is much easier to adjust the sound settings using special software for your sound card. To know whether this is FOR you. Click on the icon "My computer" right-click. In the context menu select "Properties". In the ensuing window, select "device Manager".
4
If you have Windows XP, you first need to choose "Hardware" and then "device Manager". Next find the "Audio device". Click the arrow next. If the model name sound card, so the software is installed. If the model name is not written, then you need to install it.
5
On disk driver for any motherboard should be software to the sound card. Install it. Then restart the computer.
6
After you install the software in the list of programs, find the one that matches the name of the sound card. Run the program. In its main menu should be the volume control of the sound card. Move the slider and increase the volume. In addition, you can adjust the sound balance of the speakers to select different modes, sound effects, speaker configuration.

Advice 2 : How to increase speaker volume

It would seem that the power speakers of computer speakers – the value is absolute. But in practice the same column are connected to different computers can give different sound volume. In this case, it is obvious that the reason lies in the source of the sound, i.e. the sound card of the computer, but rather in its settings. Accordingly, to increase the maximum volume of the speakers, you need in most of these settings you dig.
How to increase speaker volume
You will need
  • Computer, speakers, basic skills for setting a computer
Instruction
1
First, look at the volume level of the main indicator of the sound. It is located in the lower right corner of the screen, and its icon looks like a small speaker. The slider of the volume level should be set to maximum. If you like this volume level can stop.
2
If the volume of speakers inadequate, even when the slider adjustment is in the upper position, use the advanced menu to control the sound. To do this in "control Panel" select "sounds and audio devices". Select the submenu "Volume" and click "Advanced". A window will appear with several scales. Install the slider "Sound" in the up position and check the position of the slider of the scale "the General". If you have completed the first step, it must also be at the top, if not, move the slider up.
3
More versatile tools raise the volume there. However, many manufacturers supply their soundcards device specific software, which often comes with equalizer. If such a program exists, run it from the programs list of the start menu. In the equalizer raise the sound level for all frequencies. However, this method of raising the volume adversely affects the quality of the sound, and they should use sparingly.
Useful advice
Volume control programs often players, make sure to set the maximum volume level.

Advice 3 : How to increase the sound of earphones

When listening to an mp3 player, we often want the music sounded as loudly as possible. Of course, there is always the possibility to buy a headset with low resistance - this will increase the level of sound. But remember that you can do without it. There are several ways of increasing the music volume in the headphones, it does not require specific knowledge sufficient computer skills at the user level.
How to increase the sound of earphones
Instruction
1
In order to increase the volume of the music on the player, you can work with the volume of the original track. For this you will need to download and install the editor for audio files. Optimal options are Adobe Audition and Sony Sound Forge. These editors support faster processing and better compression quality after treatment. In order to handle the track, load it into the editor, then normalize, carefully watching the harmony of the track. Save the processing result on the hard disk of the computer.
2
The fastest option to increase volume for few songs is to use the program mp3gain. This program is able to perform only one function - to raise the level of the sound track, but it is able to process several files simultaneously, in contrast to the above music editors. Download it from the Internet and install it on your computer. Then boost the volume of tracks for downloading to the player.
3
In case you have on the player there is an equalizer you can also use it in order to increase the volume of the music. All you have to do is to put all the frequencies of the equalizer to maximum, then save this setting. Be careful that in the race for the volume of the music has not lost its sweetness.

Advice 4 : How to increase speaker volume

Often when organizing any events held at home, for example, birthday party, you need music. As a rule, one wants the sound to be louder. Also the increased sound may be needed if you just want to listen to your favorite music as loud as possible. In this case, you can use a few simple ways by which you can greatly enhance the power of the speakers.
How to increase speaker volume
Instruction
1
If you can afford to spend some money, you can buy special audio amplifier. This device amplifies the sound that is played on the speakers, so they sound much louder. Depending on the acoustic system to vary power of the amplifier. Be sure to test it immediately after purchase.
2
To amplify the volume of one or multiple tracks at once use audio editors. If you want to achieve a change in not only volume, but EQ certain tracks, use Adobe Audition or Sony Sound Forge - these editors offer broad functionality and the best quality.
3
To increase only the volume, but multiple tracks, use the program mp3gain. It can increase the volume of the sound from multiple tracks at once, but you must create a copy of a file when using it. This must be the case that after processing the file will sound with interference.
4
The simplest method of increasing volume is to maximize all frequencies EQ in the player you are using. This method only requires the EQ in the program you use for music playback. Drag all the frequency sliders at the top-most position and play the desired track in order to ensure the safety of euphony.

Advice 5 : How to increase headphone volume

Most secure headphones are overhead or monitor. If to speak about technical characteristics, it is more likely to affect the volume of the sound sensitivity. But matter and such indicators, as power and resistance.
How to increase headphone volume
You will need
  • - the characteristics of the headphones;
  • - any audio editor;
  • driver;
  • - portable headphone amplifier.
Instruction
1
Refine headphones: power, sensitivity and resistance. More powerful is not always louder. The sound output directly determines the sensitivity of the headphones, which must be at least 100 dB. Otherwise, there is difficulty when working on portable devices. Note that the resistance and capacity is inversely proportional to the value. Standard headphones are designed for 32 Ohm, and the device impedance of 16 Ohms have a higher acoustic power. And therefore, sound louder. If high-impedance headphones to connect to a portable player, the sound will be barely audible. Their purpose is stationary Hi-Fi and Hi-End appliances.
2
Check the inner adjust the volume on your music player. Turn the performance EQ on max. Note that this may increase the noise. If there is a controller on the headphone cord, look what he is situation. Set it to the max.
3
Reinstall the driver, if they are meant for your playback device. Usually this is done on computers. Check the volume settings available in the control panel. Push all levers up to the maximum level.
4
Test the headset with other sound sources. Perhaps the problems lie not in them, and that sounds.
5
Use the audio editor program to improve the quality of sound files. To increase the volume suitable for even the most simple programs, such as Free MP3 Cutter and Editor, mp3DirectCut, Music Editor Free. But be careful! Some editors can increase the volume only due to the limitation of the signal level and narrowing of its dynamic range. And this affects the quality of the sound.
6
Buy a portable headphone amplifier. There are many types of such devices designed to increase power and sound quality. However, this option is not considered economical. The price range starts from 1500 rubles and above.
7
Pick other headphones. Loudness perception depends on the type of construction, method of sound transmission and acoustic design of the headphones. Try and check for yourself plug-in ("ear"), vacuum ("gag"), patch (sound), wired and wireless, open or closed. For example, in open headphones sound deteriorates at high levels of external noise.
Is the advice useful?
Search