How to detect hidden wiring

You absolutely do not want to check the effect of the electricity when you start to drive a nail into a wall or drilling a hole under the more serious hardware. To avoid this contact, you need to know exactly where lies hidden wiring. Full Amateurs it is better to look for a power outlet using special instruments.

You will need

detector detection hidden wiring.

Instruction

Layout of home transactions undertaken in the housing sector, may seriously fail you if electricians laid the wires are not as recommended standards. With the help of instruments you can find the tear or damaged area of the wiring.

Choosing an instrument called the locator tester finder, the detector or probe for hidden wiring, pay attention to convenience, sensitivity, and security apparatus. There are those that need to connect to the network, which is not always convenient, if it is faulty. Other devices tested and Elektro looking fora transaction in a contactless manner. Just take the unit and slide it over the desired area, he somehow report the presence of voltage.

Metal detector "bars" - is a Russian non-contact device, it can detect the cable and rebar in the concrete construction, which is also useful for repair. To work with this device easy – guide front portion of the apparatus over the surface, touching her. If the indicator led will change color to red, you have found what you were looking for.

You may benefit from the proximity detector 6888-138, he is looking for mains under voltage, when the appliance. It will detect and fasteners, and metal structures hidden at depth of 2-3 cm. also works tester-tester MS-58M, and with it, you can detect harmful electromagnetic radiation. Indicator MS-158M will find the phase wire and concealed wiring.

"IVA-n" - alarm voltage and the metal does not react, but perfectly discover hidden mains under voltage 220/380 V. On the front panel can be seen five led indicators. The growth of the voltage light up more light bulbs. There is the sound of the device - unique signals increase in frequency when the device is posting.

Using the indicator flush "the Woodpecker," you will find the phase wire and check the proper connection of household electric meters, will know the fuse is good, you will find the location of the open mains.

If you need to find the wiring, lying at a depth of 30 cm, you need a specialized unit of the POSP-1. This device looks like a hand radar, equipped with a rotating antenna, he reports about the discovery of sound and light signals.

Foreign model VP-440 detects breaks in cables and wires and determine hidden track grid, detect the burned fuse and many more. Well established a new set of hidden service Sonel - LKZ-700. He is able to find illegal the contours of counters, the route of the cable at a depth of two meters, damage to the mains under the ground, the individual wires in the harness system.

Is the advice useful?