You will need
  • - Phillips screwdriver;
  • glue;
  • - matches;
  • door leveler;
  • - hammer;
  • pencil;
  • - the range;
  • - the drill.
Instruction
1
Open the Cabinet and inspect the hinges. As a rule, doors wardrobes and kitchen cabinets are fixed on the Cup hinges. One side of the loop is set in a special hole on the inside of the door, and the second is fixed on the sidewall, on the inner side. This construction allows to correct the distortions and to adjust the closing mechanism.
2
Check the tightness of the four mounting screws, which are fixed to the Cabinet door. If they are loose, tighten them. To do this, take a match and make them wooden plugs of appropriate size. Remove the screws. Gently RUB the cork with glue and insert in the mounting hole. Install and tighten the bolts.
3
To adjust the distance between the closed closet door and the front edge of its wall can by loosening the screw located on the far side of the loop, and gently pull the door forward. You must then tighten the mounting bolt.
4
If the hinges of your Cabinet are worn out and adjust the doors with their help it could not - replace the mechanism for a new, slightly changing the place of installation. To do this, remove the old hinge by loosening fasteners with a screwdriver. Mark with a ruler and pencil new position of the hinge mechanism on the doors and the sidewalls of the Cabinet. Drill the mounting holes and secure the new hinge with screws. Check your installation. If necessary, zashpaklyuyte old mounting holes.
5
Align the hollow paneled door kitchen Cabinet with door leveler. Fix the equalizer on the door so that it is located on its diagonal, from the upper loops to the lower angle. Tighten the equalizer to return the door to its rectangular shape. Note that this tightening should be performed slowly to ensure that all the shifts in binding occurred uniformly.

Strengthen the connection of the door by installing corner ties from the inside or scoring the wooden spikes.