How to turn the car

For car repair sometimes you need to put him on his side. This operation does not resulted in damage to the body, it should be done with the use of special tools and in compliance with all safety regulations.

You will need

• - tripper;
• - a spare wheel;
• - a few assistants;

Instruction

1. Before you tilt the car, think about whether or not this operation is so necessary. Might have enough turns to lift the side of the car with the Jack and hang on stands, to use the repair pit or ramp. Don't forget that any careless action while turning the vehicle may result in serious damage to the hull.
2. If you still decided to turn the car, you will need a special dump that is suitable to your car brand. Since buying this device requires funds, and self-Assembly is difficult, take it for a few days rent. The use of the factory device is the only reliable and safe way to tilt a car.
3. There is a simple variant of the vehicle overturning, usually applied to the "classics" VAZ. Will it fit to other cars of similar design. Please note that you will need the help of several people. To perform the incline of the machine alone is impossible, you risk to damage it or get injured.
4. Lower front side window, insert vertically in the window opening the spare tire closer to the front door. After that, the assistants must gently tilting the car on its side, it is necessary to support the spare tire. Touching the ground, the wheel will securely hold the car upside down. When you turn the car watch carefully that the wheel was located vertically.
5. You can make the dump by yourself by following online schemes. In the manufacture of devices do not use wood or other fragile materials. Working with a home-made device, keep in mind the possibility of its failure, so always one way or another to insure the car from falling. For example, place additional supports in the form of a solid wooden log.