You will need
  • - antiseptic (biocide);
  • - construction tools (trowel, brush, roller, etc.);
  • - copper sulphate;
  • - "White";
  • - "Domestos";
  • - bleach;
  • - baking soda.
Instruction
1
Before you begin removing the mildew, eliminate the reasons because of which it appeared. Without this you will not be able to get rid of mold completely. Dry the room, arrange waterproofed floor or walls, through which space penetrates moisture, increase the gap between the furniture and the wall, provide adequate ventilation to the premises.
2
If the wall where there was mold, pasted Wallpaper, remove them. Scrape off the places affected by mold with a trowel or scraper to a solid Foundation. On the cleaned wall should not be places touched by mold. Try to quickly make the room cleaning products. Mold spreads by spores, and do not need to contribute to its reproduction, spreading spores throughout the apartment.
3
Treat the wall with antiseptic (biocide). Apply it with a brush, roller or spray gun. Stronger than the wall material is impregnated with the antiseptic, the better. Repeat the process several times with breaks between applications. Detailed technology of application of a biocide is described in the instructions to a particular drug.
4
Dry the wall after the application of antiseptic, programsuite and stukatura her. Further work will depend on what coverage you choose as a finish.
5
In the absence of antiseptic prefabricate, you can use copper sulfate. Dissolve 20 grams of the drug in 1 liter of water and treat the wall with a solution several times, allowing it to dry between coats. Using this substance, you need to keep in mind that copper sulphate is a generic drug that kills all kinds of fungi.
6
Against mold can be used many chlorine compounds – bleach "White", bleach, the Domestos so Technology use remains the same – the coating solution to a place infested with mold.
7
Anti-fungal properties of ordinary baking soda (one tablespoon per pint of water) and soap. Remove mold from walls by wiping them with a cloth soaked in solutions of soda or soap.
8
To kill the mould, you can use "non-contact" method, is particularly well suitable for removal of mildew on the walls of the basement. Seal the basement, light on the metal sheet a piece of sulphur at the rate of 2 grams per 1 m3 of the volume of the room and quickly leave it. Sulfur gas produced by burning sulphur will destroy all the fungus in the basement. Before you can enter the room, thoroughly ventilate it.