Unpack and inspect for mechanical damage. They must be completely absent, since in case of breakage, you may be denied warranty repairs.
Ensure the wiring. For the conditioning necessary to allocate a separate wire with the plug supplied with machine. If on the same vein to connect other devices can cause overheating of the wires and ignition.
Install the air conditioner. It is best to invite installers, because it will take special equipment. You can sign a preventive maintenance contract with the installers, then you will not have to do seasonal cleaning.
Run the air conditioner. Some air conditioners have a test program or so-called self-diagnosis. This program tests the conditioning and gives the display control unit, the message about the functioning of all systems. If a violation is issued error code, which allows you to determine the cause of the disruption.
In the absence of the air conditioner system self-test, run it in normal mode. If it does not vibrate, it means that the installation carried out efficiently, the mounts are installed correctly. You can start diagnostics of the main functions.
First, can check the cooling, then heating, or Vice versa. Subsequently identified defects can bring you a lot of inconvenience. On the functionality of the air conditioning find out in the attached instructions.
The main function of conditioning is to maintain a predetermined temperature in an enclosed space. If he can not cope with this function, the meaning of all the rest, even the super-feature.
The resource of the air conditioner depends largely on the quality of the installation. It is best to buy it in a special climate firm, then the price will be included the professional installation and routine maintenance. In the end it may be good savings.
Advice 2: How to turn on the air conditioner without the remote control
Air conditioning today, perhaps, an integral part of any office interior, houses, apartments. It allows you to maintain the optimum indoor climate conditions necessary for human life in different seasons of the year. As a rule, included air conditioning system with a special remote control remote control, but there are times when in a moment of need that the remote is not at hand.
Inspect air conditioning and check whether there is wiring for it. There are times that I'll go with the offices, the old owners leave but a box in the room, and the necessary wires are removed or torn. If you are sure that your air conditioner is fully functional, perform the following steps.
Inspect the front panel of the air conditioner. Find below blinds direct device with a small plastic cover in the tone of the air conditioner. Take it from two sides (from different sides) with your fingers and lift carefully to the top. This requires a little bit of pressure on it and pull up.
Inspect the panel under the raised cover and look where the button. Button depending on the model and manufacturer may be the left and the right. Often, it has the illumination. If highlighting is available, at an operating condition of the conditioning it will glow green or orange. Under the button, as a rule, there is the title or on off or operation.
Click on the detected button and hold for a few seconds. Air conditioning should work. Check the air blowing out of the blinds. If it's cold and you want warm, hit the button again, but don't hold it with your finger.
You should know that using the front panel of the air conditioner can be enable only in automatic mode, but to change the temperature you must have the remote control the remote control.