Instruction
1
To completely remove efflorescence from bricks, not enough to stock up on plenty of water and brushes. By the way, it is no good cause can not. Metal brushes destroy the bricks even stronger. The water penetrated inside, simply pull on the surface of the bricks even more salts. The fact that those soluble salts that accumulate on the bricks, over time, become insoluble compounds. These connections will have to remove only special trains.
In this fight use water repellents. This is a special cleaners. They give the different construction materials and an additional property of repulsion of water. The so-called hydrophobicity - great method. This is the main way to prevent the appearance of efflorescence. After processing, leaching of salt from the bricks is eliminated. Importantly, the hydrophobicity will not flow more water inside the brick. The liquid will drain a balls to the wall. Brick does not get wet.
In this fight use water repellents. This is a special cleaners. They give the different construction materials and an additional property of repulsion of water. The so-called hydrophobicity - great method. This is the main way to prevent the appearance of efflorescence. After processing, leaching of salt from the bricks is eliminated. Importantly, the hydrophobicity will not flow more water inside the brick. The liquid will drain a balls to the wall. Brick does not get wet.
2
It is very important not to change the appearance of masonry, not to spoil the surface, aesthetic appearance. To do this, use the special snow ploughs during cleaning of the facade from salts. Such cleaners are removed, saline, and calcareous sediments, and atmospheric pollution too. The intensity of the action on the bricks there are different cleaners. For example, "Tipr PF" is applied to the outer part of the wall with a brush, roller. After half an hour you can wash off the excess cleaner with plain water. Other tools, such as "NEOMID 550 Antisol", "Armix" and other use in accordance with the attached instructions.
3
Possible prevention of salt deposits on the walls. It's very simple. Starts with technology, styling and choice of wall material. In the winter of masonry laying brick better to just give up. But if this fails, avoid the moments when the rain and the snow flying in unprotected masonry. For cement mortar use frost-resistant additives. Further, to the efflorescence was not, the walls are insulated with roof and gutters from atmospheric moisture and waterproofing from ground moisture.
