You will need
  • Iron, a thin cotton cloth, paper towels or toilet paper, gasoline, turpentine, alcohol or acetone, cotton swabs or sticks, washing powder.
Wait 10-15 minutes until the paraffin or the wax will harden and become firm. Clean off with tissue translucent plaque, paskalev it with your fingernail, the back side of a knife, edge of a coin or other similar object. The wax crumbles easily and leaves from fabric. With the point of a solid mass, carefully remember the location of contamination and then shake off atroseptica particles brush. In place of wax blotches will remain oily trace.
Put the contaminated site folded several times with a paper napkin or other article of white, absorbent paper (disposable towel, toilet paper and so on). Cover the stain with a thin cotton cloth and 3-4 times iron the sandwich with a warm iron. Wax and paraffin are melted very easily, and the paper substrate absorbs pollution.
Change the cloth to clean and re-iron the fabric. If the cloth remains clean, proceed to the next phase, if on paper, traces of wax will change the substrate again and retry the operation.
On the fabric will be slightly visible trace of the stains: it does not require additional processing and is coming off easily when washed with conventional detergents.
If the fabric cannot be ironed – wax stain can be displayed with solvents such as turpentine, gasoline, ethyl alcohol or acetone. You can use stain removers, on the packaging, which indicated that they intended to remove oily stains.
Clearing tissue from the wax film, apply solvent with a cotton swab or cotton swab. To spot not broke, apply the solvent from the edges of the contamination, and under the stain, place a paper towel or cotton cloth. Wait 10-15 minutes, and then treated asterite place. If necessary, repeat the operation again.