You will need
  • - mounted gas boiler;
  • roulette;
  • pencil;
  • paper;
  • - profile CD and UD;
  • - dowels;
  • - a drill bit;
  • - screwdriver;
  • - screws;
  • - spectator from fire;
  • - plasterboard;
  • construction knife;
  • - hollow-door.
Instruction
1
Consider in advance what you want to do design kitchen design and imagine it in your mind. Analyze whether mounted boiler and blend in with the interior, if it's just to leave hanging on the wall. Modern wall-hung boilers, quite nicely decorated (they can be white or shiny), so harmoniously fit into the interior.
2
If, in your opinion, the hinged boiler will still stand out strongly caught my eye, hide him behind the door of the kitchen Cabinet. It will have to make the wardrobe on his size. To begin measure the dimensions of the hinged boiler and transfer them on paper (on each side give an allowance of 50 mm) to form a sort of pattern. In the side of the boiler back 50 mm and slide along the wall line parallel to the side edges of the heating equipment, hanging on the wall. Repeat the same procedure, departing from the gas boiler up and down 50 mm and having a line on the wall. The result is a markup of the future Cabinet.
3
For painted on the wall of the contour attach the CD profile, pre-cut to size of the boiler taking into account the seam allowance, securing it to the dowel. Then using the UD profiles and screws, assemble the frame of the future attachment of the kitchen Cabinet.
4
On the earlier pattern cut sheets of drywall and treat them with a special substance that prevents fire. After the plasterboard is dry, complete the installation.
5
Zashpaklyuyte drywall, and then paint and allow to dry. Install tracery door. Locker for gas boiler ready.