Advice 1: How to connect to the Internet via your home phone

To connect to the Internet using a phone line and not broadband, you must have a DSL modem or router. If you need to connect several computers or laptops, use a multiport router.
How to connect to the Internet via your home phone
You will need
  • - DSL router.
Instruction
1
Pick a router, any to your devices. In this case we are talking about laptops, because some of their models are not able to connect to any Wi-Fi network. Find out the requirements of the wireless adapters, studying the instructions on the manufacturer's website.
2
Get any Wi-Fi router. Of course, it must have the connector DSL to connect to the provider's server. Connect the telephone line cable to the specified port using a splitter. This device will not only help you to simultaneously connect to the same cable and router and landline phone, but also to reduce interference on the line.
3
Connect the Ethernet port (LAN) Wi-Fi router network cable. The other end connect to the network card of the computer or laptop. Turn on the equipment connected to the router.
4
Start a web browser. Enter the IP address of the router in the input url. Press the Enter key. After the open the settings menu Wi-Fi router, go to WAN. Configure Internet access by setting the required values for some parameters. Since we are talking about DSL connection, it is recommended to select the Protocol PPPoE and enter the values that meet the requirements of your provider.
5
Now go to the Wi-Fi menu. Create a wireless access point. When setting the menu refer to the operating parameters of your notebook. Save the settings and restart the Wi-Fi router.
6
After connecting all desktop computers to the Ethernet ports, and laptops to wireless access point, you will have a home network of mixed type, in which all devices will have access to the Internet. Make sure that the router automatically connects to the server provider. This will help to avoid problems in case if the equipment is disconnected from the mains.

Advice 2: How to connect to the Internet without cable

The vast majority of laptop owners gladly went to use wireless Internet. But only a few know how to quickly and easily set up your own wireless access point.
How to connect to the Internet without cable
You will need
  • Wi-Fi router.
Instruction
1
To create a wireless network you will need a Wi-Fi router. The choice of this device rests on your shoulders because only you can decide what parameters it should have. It is important to consider the maximum distance signal transmission, types of security, and radio programs supported by the router, as well as the possibility of its connection to the cable provider.
2
Purchase a Wi-Fi router and install it in his apartment. Connect the power supply. Plug the cable Internet connection into the WAN port (Internet) router. Using network cable connect the device to the laptop through the LAN port.
3
Open the main menu Wi-Fi settings of the router. It is necessary to enter in the browser address bar the IP of the device. Open the menu "network setup" Internet Setup). Configure the connection to the Internet. To do this, specify the type of data channel, the server address, login and password for authorization at the provider. Don't forget to enable the automatic issuing of IP addresses DHCP.
4
Navigate to the wireless settings of the access point (Wireless Setup Settings). Create a name (SSID) of your network and password to connect to it. Note the value of the following parameters: type of radio and the option of data encryption. Select from the options those that you're working with the wireless adapter of your laptop.
5
Save the changes to the settings. Power off the wifi router for a few seconds. Turn it on again.
6
Disconnect the cable by which you connect the laptop to the router. Activate and search for wireless networks. Connect to the access point which you recently created. Make sure you have access to the Internet. Now the main thing is not to reset the router and follow the changes of the connection settings from your provider.

Advice 3: How to connect router to dsl modem

You can build several different laptops connect to the network DSL. Some of them are designed for the use of several devices: dsl modem and wifi router. This allows you to connect a WAN router to network ADSL.
How to connect router to dsl modem
You will need
  • - network cables.
Instruction
1
First, configure the operation parameters of the dsl modem. Connect it to a telephone line using a DSL connector. This connection to perform better through the splitter to ensure the best quality signal transmission. Connect the Ethernet port of the modem network cable. The other end connect to a laptop or desktop computer. Enable this PC.
2
Open a web browser and go to the interface settings of the modem. In this case, you need to configure only one point – WAN. Select the type of data transmission PPPoE and enter additional parameters: user name, password and access point. Enable NAT, if it is possible to make this dsl modem. Disable the DHCP function. This will allow you to set Wi-Fi router a static IP address. Save the settings and restart the dsl modem.
3
Now disconnect the network cable from the computer and connect it to the WAN (Internet) port Wi-Fi router. Using another network cable, connect the LAN port of the router with the computer. Open the settings menu wireless equipment. Go to WAN menu. Specify the access point's IP address dsl modem. Change the type of data transfer Protocol for the Static IP. Enable the DHCP function to avoid additional configuration of computers and laptops.
4
Enter the value IP address Wi-Fi router. It must be different from ' dsl modem only the last segment. Save settings menu the WAN.
5
Click Wireless Setup (Wi-Fi). Configure the wireless access point. Don't forget to choose enough high-quality security. Save the wireless network settings and restart your wifi router. Make sure that the device have access to the Internet. Connect mobile computers to a wireless access point. Desktop PCs connect to the LAN ports of the router.

Advice 4: How to connect to the server via the Internet

You can connect your computer to the server via Internet with the use of VPN (Virtual Private Network). This will allow you to properly allocate resources on the remote network, and in the correct order to configure the server.
How to connect to the server via the Internet
Instruction
1
Configure Windows to connect to the server properly. Usually the software needed to create a VPN included in Windows Server operating system. It is better to set it not to acquire any additional network equipment.
2
Download Windows Server and hit the "start" button, select "Programs", "administrative tools" and "configure your server Wizard". Open the "Remote access / VPN Sever" in the list of services.
3
Click on the circle to the left of the option "Virtual private network VPN and NAT". Select the network adapter that connects the computer with the Internetif it is available.
4
Select the option automatically assign IP address. Select "No, use routing and remote access to authenticate connection requests" to go to the page "Managing multiple remote access servers".
5
Click the "start" button, select "Programs", "administrative tools" and open "Active users and computers". Go to "Remote access" tab under "Properties". Select "Allow access" for each user that you want to access the server via VPN.
6
Go to the computer name you wish to connect to the server via the Internet. Press "start", open "control Panel", then "Network and Internet" "Network and sharing center setup new connection or network".
7
Select "Connect to a workplace", "Use my connection to the Internet" and enter the IP address of the router to connect to the server. To find this address, open the router configuration page.
8
Enter the user name and password for the account, which provides access VPN. Use a VPN connection to connect to the server.
Is the advice useful?
Search