The easiest way after folding to turn over the puzzle so that wrong side is on top and glued to his base. However, if the puzzle is too big, turn it over can be difficult. To simplify this process, take care of gluing pre – start to assemble the puzzle on a mobile basis, for example, on a sheet of plywood, fiberboard or cardboard.
When the puzzle is assembled, cover it with the second solid sheet of the same material and turn it over. The edges of the leaves for reliability in the coup can hold stationery clips.
If the puzzle was going on the floor, or too large, use other means of bonding. Clean the surface of the collected paintings from dust and dirt, and then put the puzzle plexiglass or plastic wrap.
The surface of the puzzle can paste over transparent wide tape, but much better it will look, if you cover the surface with glue. Well suited place for this purpose PVA glue – dries, it forms a transparent matte film. Apply a generous amount of glue on the front side of the puzzle, and then spread it with a sponge, brush or putty knife to the glue filled all the joints and gaps between parts.
You can also use a special transparent glue for puzzles. To make gluing more reliable after the glue dries, gently flip the puzzle on the reverse and glue it on the back side cardboard, fabric, adhesive interlining or plywood.
Never use for gluing puzzles paint – he does not stick details and spoil their surface. If you want to emphasize the brightness of the colors of the puzzle, cover the surface of the silicate stationery glue – it creates a transparent glossy film on the surface of the picture, making it brighter.
For the final decorative design fabricate or buy a frame, exactly suited to your puzzle size. Hold the assembled puzzle between the rear wall of the frame and glass, and tightly secure the frame. Ready framed puzzle can be hung on the wall, and it will decorate your home or office.