Instruction
1
The size of payment for utilities, as follows from paragraph 13 of the resolution of the RF Government dated 30.07.2004, No. 392 is defined as the product of the tariffs of the respective utilities on the volume of the consumed resources.
2
The volume is calculated by individual metering devices, and in their absence, is defined as the average norms of consumption, which sets the local administration.
3
Thus, to calculate the drainage, multiply the amount of cold water (in cubic yards) obtained in accordance with the meter in your apartment, on the rate of drainage (including VAT).
4
Multiply the amount of hot water (in cubic yards) obtained in accordance with the meter in your apartment, on the rate of drainage (including VAT).
5
Fold these two numbers, their sum will be the payment for water removal, i.e. for the use of engineering structures to clean up and dispose of waste water your home.
6
If the lack of meter payment for Sewerage is calculated on the basis of norms of consumption of water adopted in your area. As a rule, regulations are approved annually and published in the media and on the website of the administration. The cost according to the standards, and you can learn in a management company.
7
In multi-storey buildings, the calculation of the sewage takes place at each apartment separately, and according to the testimony of obschedomovogo metering device. If the appliance is not installed according to the standards, the expense to tenants exposes the management company.
8
If you want to put in the apartment a separate meter for the water, you must notify the management company. She gives permission for the installation of the meter, it is sealed, make recalculation of payment for utility services of water supply and sanitation.
