Advice 1: How to make a safe

A safe is a very important thing in any home, especially if you have valuables to store. Make safe from any scrap materials. Choose them depending on what you want to store in the safe, and how you want it to look.
How to make a safe
You will need
  • Metal box
  • Drill
  • Screwdriver
  • Screws
Instruction
1
To make safe, locate the appropriate metal box, which will not cause unnecessary suspicion and will not seem strange to keep such a box in the house. Depending on the size and quantity of your values it may be a box of chocolates or tea – any metal, with a lid on hinges.
2
Take the box from which you want to do the safe shop and ask a welder to make the boxes for the castle. You can pick the lock of any code or keys. It all depends on what you are more likely to lose keys or forget long combinations of numbers.
3
Attach your homemade Deposit box in a safe place in your home with the help of tools. Do not choose to secret places obvious places (for example, securing a safe under the bed you risk that the burglars can easily find). Go to the selection of safe locations for your safe creative.
4
Remember to make a homemade safe is waterproof and fireproof is hardly possible. So try to store in it only those items that will not spoil. After all, the main purpose of your safe – keeping your valuables from thieves.

Advice 2: How to make a gun safe

The presence of the safe is a prerequisite for the issuance of license for acquisition and possession of weapons. The main requirement for the storage of hunting weapons – to ensure the security and prevent unauthorized access to weapons by unauthorized persons. Modern industry produces a sufficient variety of safes and cabinets for storage of weapons and ammunition, but you can build a safe and their hands.
How to make a gun safe
You will need
  • Sheet steel, metallicheski area, castles, drawing, angle grinder, bolts, file, welding machine
Instruction
1
First determine the required dimensions of the safe. Its height will be determined by the dimensions of the weapon, because not every sample can be disassembled for storage. Universal safe, suitable for most long arms, shall not be less than 1300 mm in height. The width and depth of storage should allow to keep him as a weapon with mounted optical sight, which can have a sufficiently high brackets. The width of the safe will depend on the number of weapons that you intend to store in it. Optimal depth and width of about 500 mm.
2
Pick up the materials for the manufacture of the safe. The law On weapons States that the thickness of the walls of the metal box must be at least 3 mm. keep in mind that a receptacle for arms and ammunition can be made from other durable materials, for example, of wood lined with metal. The choice is yours. In addition to the sheet metal of the required thickness, you will need the metal corners for the ribs and two castles, as well as metal sheds (three to five pieces, depending on the weight of the door.
3
Cut the piece for the walls, bottom, top and door of the safe. For metal cutting use angle grinders ("grinders").
4
The Assembly box of parts is performed by welding with a minimum value of the current, otherwise the metal can burn through. You should try welding on unnecessary scraps of metal. Assembly start with the rear wall. To do this, put it on a hard surface and weld to the side wall alternately, and then the upper wall. All spot welds should be placed inside the box at a distance of about 100 mm from each other.
5
Cook the basis of the safe, give it stiffness, finished the front part, where it will be mounted in the door area. First weld area to the safe, and then cook it the elements together inside the safe.
6
Pre cut out metal door reinforce to stiffen the area, privaris him first to the door, and then cook part of the area between them. The area will also impede the attempts of the attackers to remove the door on the shed in the locked position. Now drill holes for two locks (as required by law).
7
Proceed to the installation of the door. Sheds weld to the corner through holes for screws. Now finish the installation, privaris the door to the shed.
8
Fabricate a box for ammunition. It is more convenient to implement it as a separate element and then welded inside of the safe through pre-made openings in the rear wall.
9
Ready safe paint and glue leather. To ensure the reliability of storage of the weapon attach the safe to the floor with screws or anchor bolts, using washers.

Advice 3: How to change the code on the safe

One of the ways to ensure the safety of valuables in case of fire or penetration into the room thieves – store them in the safe. Design of the safe and the presence of a complex code makes hacking difficult, weight and the ability to build a wall impairs its removal from the premises and the material from which it is made, protects from the effects of fire and explosion. In order to avoid a situation when money will be safely tucked away in the safe from the owner, pay attention to the installation code.
How to change the code on the safe
You will need
  • - instructions for use of the safe;
  • - handle;
  • - a sheet of paper.
Instruction
1
Read the instructions and check the opening mechanism of the safe. Try to close and open a new safe using factory code from the user.
2
Proceed to change the code. Open the safe door, not closing it, lock the lock. To make 4-5 complete revolutions of the code disk in a counterclockwise direction. Enter the factory combination code (it is indicated in the instructions, as a combination for the first shift code), also specify in the instructions the number of times to rotate the drive mechanism and the rotation direction. For example, a possible procedure:
- rotate the mechanism handle counterclockwise to lock figure 10 opposite to the working label. Repeat the procedure 4 times;
- turn the knob clockwise the arrow, set the figure 20 on the contrary the working label. Repeat the procedure 3 times;
- turn the knob counter-clockwise, opposite of the working marks install figure 30, do this 2 times.
3
Insert into the hole located on the inner side of the safe door, special key until it stops, then turn it 90 degrees clockwise. Leave key in this position while installing the code.
4
Refer to the instructions, familiarize yourself with the requirements of the manufacturer to set the code. Invented write code on paper not to forget. Do the following actions (for the different safes they can vary, please check the user manual):
- turn the knob of the mechanism for setting the code counter-clockwise and set opposite to a level change code the first digit of the new code. Repeat this procedure 4 times;
- rotate the handle mechanism in a clockwise direction, set the second digit set of code in front of the marker to change the code, do this 3 times;
- turn the knob counter-clockwise, opposite mark for changing code to fix a third figure asked code, repeat the procedure 2 times.
5
Return to the previous position of the special key and turn it counterclockwise 90 degrees, then pull it out. This change of code is completed.
Note
Definitely two or three times to check the correctness of the new code while the door is open, setting it and taking off again.
Useful advice
When a safe turn disc to install the code slowly and smoothly, each digit of code set is strictly under the label. A combination lock is a precision mechanism, try to treat him gently.

Advice 4: How to mount a gun safe

The legislator has stipulated many conditions to ensure public safety when storing, carrying and use of weapons. They are not firearms, signal, sound and light, traumatic and other types of weapons excluding pneumatic. To the representatives of the Supervisory authorities was not to claim you as the owner of a source of increased danger, it is necessary to observe a number of requirements, including the availability of safe is not the only one.
How to mount a gun safe
You will need
  • - the perforator;
  • - angle grinder;
  • - discs for stone;
  • core bits for stone;
  • - pobeditovye drill;
  • - anchor bolt not less than 16 mm in diameter - 2 PCs.;
  • metal expander collet Chuck - 2 PCs.;
  • - cement;
  • - sand;
  • - water.
Instruction
1
Storage requirements for weapons are governed by the Appendix to order of Ministry of internal Affairs of the Russian Federation No. 288 of 12.04 1999 "On measures to implement decree of the Government of the Russian Federation of July 21, 1998 № 814". In layman's language, this means that the document set out an exhaustive list of conditions that you will need to complete, to acquire weapons.
2
In fact it turns out that the weapons can be stored not only in the special boxs, but also in wooden boxes upholstered with durable steel. Its thickness should be not less than 2 mm for the arms and 3mm for the storage of ammunition. If you will be storing guns and ammo in one safe, ammo, gunpowder, etc., there should be a separate shelf with a lockable door. Please note that the basic design of the lock on the door and the main lock may not coincide.
3
Since the Resolution of the government explicitly stated that the thickness of the walls in the rooms where the weapons are stored must be at least 20 cm for concrete panels and 36 cm for brick or stone masonry, safe for a handgun can be done inline.
4
This in the wall it is necessary to hollow out a niche the size of the safe with a margin of 5-7 cm on each side. The contour of the niche, it is possible to saw through with a powerful grinder, equipped with a disk of stone, and hollow out the cavity of the punch, working in unstressed mode via headphones or diamond crown. Unfortunately, non-professional technique with this objective is unlikely to cope if you are dealing with a wall of granite or reinforced concrete.
5
The gap for the back wall of the safe to do. The front wall of the safe should be flush with the supporting structure. Put the safe on wood rails, slightly shorter than the depth of the niche, placed inside it. Top rackline gap similar guides. Watch out, however, that the thickness of the wedges was not excessive, otherwise, the door of the safe may no longer be closed. Also it should not be closed with the effort.
6
Now try to fill the free space between the housing and the side walls of the safe granite rubble. Mix a solution of cement grade M 500 or equivalent at the rate of 1:4:1,5. The solution should be fluid enough to fill all the voids between the gravel. Pour the solution on the upper wall of the safe, pushing it further into the niche.
7
When the voids between the gravel are filled, wait some time, until the solution just begins to drag. Dilute the solution in standard proportion and fill in the space between the niche, bottom and top walls of the safe. After the solution has hardened, smoothen bumps on the wall with a thin layer of plaster or putty.
8
This method of fastening of the safe will not work, if you are the owner of long guns, such as hunting. In this case you will have to attach the safe to the wall using anchor bolts with a minimum diameter of 16 mm. would Be better if the anchor bolts you attach to the metal expander collet, although this condition is not mandatory under the law. But this method of fixing the most reliable. For this you will need a drill with pobeditovym a drill of appropriate diameter. Otherwise, insert the anchor bolts is no different from fixing with screws and dowels. Attach a safety Deposit box in such a way is, just in two places.
Is the advice useful?
Search