Advice 1: How to disable check disk at boot

If you begin to notice that when booting the operating system immediately before the screen appears "Welcome" starts the program to test the hard drive, it could be caused by small damage to the boot of the registry or any failure in the hard drive. If you know that there are options for replacement or treatment of your current hard drive, you can disable the automatic startup of the utility.
How to disable check disk at boot
You will need
  • Registry editor Regedit.
Instruction
1
In order to solve this problem, you need to go to the registry editor program, Regedit. It is worth remembering that editing the registry is dangerous so make first a backup of the registry files. To run the program, click menu "start" - "Run - > enter Regedit and click "OK".
2
In the editor window, find the folder [HKEY_LOCAL_MACHINE/System/CurrentControlSet/ControlSession/Manager]. In this folder there is the value BootExecute. BootExecute value by default, has one species - autocheck autochk *. If this parameter has another value, replace it with the default value, autocheck autochk *).
3
Click "OK". Close the registry editor and reboot the system.
4
When does not help edit the registry values inthe rank may lurk in the disk that is marked "dirty" bit, as its deletion after checking does not occur. Check the status of a dirty bit can be done with Fsutil.
5
To do this, run the run command as described above in atleast with the registry editor. Enter the command Fsutil dirty query Y: letter of the hard disk). You will see a message about "contamination" of the disc.
6
You can use the command Chkntfs – this will allow you to cancel the test drive while subsequent loads of the system. The syntax for this command is as follows: Chkntfs /x Y: (Y: is the drive letter of the hard disk). You will see a message about the system used NTFS.
7
After closing all Windows, please reboot your system. Before the appearance of the screen whenvestia program starts checking the disk. It will give the same "dirty" bits, but will no longer bother you.

Advice 2 : How to disable validation when loading Windows

Every time you boot the operating system automatically runs Chkdsk. This utility scans your hard disk for errors, possible failures in the file system. Of course, nothing wrong with that, but the download speed of the system decreases. Meanwhile, this procedure can be disabled, thereby increasing the speed of loading the OS.
How to disable validation when loading Windows
You will need
  • - computer with Windows.
Instruction
1
To disable scan of the system drive using the following steps. Click "Start". Select "All programs", then "Standard program". Among the standard applications have a "Command prompt". Start it.
2
Then in the command prompt, type Chkntfs /X C, where C is the system drive letter. If your system drive has a different letter, then, accordingly, it is necessary to register. After entering the command press the Enter key. Close the command prompt. Now automatic check system partition disabled. In the same way you can disable the automatic check of other partitions of the hard disk. Just at the end of the command should write the letter of the partition of the hard drive for which you want to disable scanning.
3
Another way to disable validation is to edit the branch of the registry. In the command prompt, type regedit. A second later starts of the registry editor window. His left side is a list of the main sections of the system registry. Find the HKEY_LOCAL_MACHINE.
4
Click on the arrow that is next to the name of this section. Repeat the procedure near the subsection SYSTEM. Thus unlock the sections in this order: CurrentControlSet/Control/Session Manager. Session Manager don't need to open, select it using the left mouse click.
5
After selecting the last section in the right window will be available to branches to edit. Find the branch called BootExecute. Double-clicking the left mouse button. Now you can edit it. All you need to do is before the asterisk to add the /K option:C. eventually edited the thread will look like this: autocheck autochk /k:C Save the changes. After that, the disk check will be disabled.

Advice 3 : How to fix a disk

In the process of working on your computer's hard disk can appear a variety of errors. To correct them we must regularly inspect the disc using a special utility included into Windows.
How to fix a disk

File system


If your hard drive is formatted as FAT32, it should be checked at least once a week. If you use NTFS, the need for such verification is not, it is performed automatically each time the computer starts. To find out file system disk, open its properties and go to the tab "General". Here you will see the appropriate entry, for example, File system: FAT32".

Running the utility


Utility check disk for errors requires exceptional hook access. This means that no other program during its operation must not be running. If necessary, the utility will warn you about running programs and may need to reboot the computer. Close all running program on the computer, open the properties of drive C, to do this, click the right mouse button and select "Properties" in the menu. Go to the tools tab, under "error-Checking" click the "validate...".

The scan options are


This utility has two options for checking the disk. The first involves automatically find and fix system errors, it is recommended for most users because not require additional action. To start this mode, select the "Automatically fix file system errors". If you are an experienced user and want to see what errors were found, do not select this option. The second test option is to search on disk bad sectors and restoring damage to activate this mode, check the box "scan for and attempt recovery of bad sectors". Physical damage to the sectors, of course, not eliminated, but the utility can help you to transfer information from them to other sectors.

The verification process


By making the necessary settings, click "Start". If the utility cannot gain exclusive rights to the disk, it prompts you to restart your computer and scan at the next startup. If you agree to this check, click "Yes." Please note that the verification process can take quite some time. Its duration depends on the condition of the hard disk, as well as the parameters that were selected when configuring the utility. During operation of the utility on the monitor screen will display a blue screen, you can also force to stop this process. The utility completes the normal boot of your computer.
Is the advice useful?
Search