You will need
- - Styrofoam plates
- - glass wool
- - mineral wool
A family of insulation materials includes materials in different price categories. If any material is cheap, it does not mean that it is inferior in quality and properties of others. In a series of cheap materials are glass wool insulation products made of polyethylene foam, and others.
Extremely important question of insulation of load-bearing components of the Foundation. Largely it depends on their durability and heat balance of the house. This is especially important for Northern regions. When the device of the demon of the structure of the insulation boards, for example, polystyrene foam, lay in several layers onto the prepared area and fill with concrete. Further construction produce in the usual manner. For horizontal and vertical protection of the Foundation from freezing, place the plate along the base.
Both flat and sloping roof podvergayutsya the impact of adverse external and internal factors. From the outside the roof is continuously exposed to changes in temperature, precipitation, dryness; inside humidity. For insulation of roofs successfully and widely applied polyurethane foam. It can be applied by spraying or installed ready plates.
On polystyrene plates covering non-ventilated (warm) the roof must be laid bituminous waterproof layer. For insulation of ventilated (cold) roof slab should be laid only on its rear side. To prevent condensation of water vapor leave the vented plane.
For facade insulation required multi-layer insulation of special material intended for these purposes. First, the front insulation is attached and then attached to the facade base by mechanical means. The insulation is applied to the reinforcing layer and the finishing material.
For façade insulation suitable material "Termosteps". Also available at the price of the products of the company Rockwool: "Acoustic Batts" or "Venti butts". All of these materials are high strength, lightweight and easy to install.
For wall insulation material can be laid both inside and outside the house. A wall thus insulated on the whole plane. For this type of work is recommended to use materials that represent the plate. It is possible to produce wall insulation mineral wool plates, polystyrene foam, other cheap heaters.
To the cheapest on the market content experts attribute the insulation "Hansol", "geokar". For insulating the basement and ceilings you can use the fiberglass. It is non-flammable, environmentally safe, durable and protects against noise and cold.
To protect insulating materials from moisture, use a vapor permeable film and a diffusion membrane.