You will need
- Fabric, scissors, tracing paper/pattern paper, crayon, pencil, safety pins, sewing machine
The cut of this collarless must exactly fit the shape of the neck. To do so, attach the pattern detail blouse (or a blouse) to the paper pattern and carefully draw a line of the neck with a pencil.
Based on this line construct a drawing of the collar. Its dimensions depend on the size of the shirt. For example, the width of the round collar blouse 42 size will be 5.5 cm don't forget that you need to leave a seam 0.5 cm.
Make pattern for podkralas details. With its help, we will attach the collar to the product. The base conforms to the shape of the base of the collar, and the height is 1,5-2 see
Before you begin, wash the fabric from which you will carve out the collar. Then, already in finished form, the product is not a village or a changed form.
Cut out collar along the warp threads. Pin a paper pattern to fabric safety pins, and then draw a chalk. Make a second item for the lower part of the collar. Another part of the same form made of nonwoven fabric is used for lining. Cut also Podkayne detail.
Attach the two parts of the collar to each other and face inward. Top off with non-woven lining. Baste collar stitch ' forward needle, leaving the center of the lower base of the collar hole 1.5-2 cm, then the collar could turn out.
Stitch detail on the sewing machine and turn on the front side. Sew the remaining hole overlock stitch. Smooth and otparit collar.
Tuck and stitch the bottom and side faces (i.e. those that do not connect with the neck and the collar) podkralas details.
Attach collar to blouse, on top of him, face down, put Podkayne detail. Baste all the pieces, and then prostrochite them.
Then lift Podkayne detail and tuck it inside the neckline. Pristrochite it to the wrong side of the blouse.
Advice 2 : How to sew the collar on the form
The undercollar is the blind stitch the material in order to prevent contamination of the collar. To sew the undercollar to the form seems to be not a difficult task. However to do this properly, you need to consider some nuances.
You will need
- - threads;
- - needle;
- - undercollar.
Please note that the undercollar is a narrow piece of white cloth of rectangular shape. Sew it yourself or buy ready-made, stitched in a specialty store where the item is available in several sizes.
With self-manufacturing material blind stitch fold the thick white cloth in half. Thus the undercollar will be more durable.
Tutuila carefully blind stitch the material and the collar shape.
Prepare a strong thread of white color with a length of 70-100 centimeters and a needle.
Carefully begin to sew the undercollar to the collar on the reverse side. Try to achieve such a result, to the thread on the front side was not visible. To do this, the needle must be stick on the outside is very close to the place where it came out.
Don't forget that the undercollar needs to be on the top and front of one millimeter. It is desirable that the number of stitches in the upper part of the blind stitch of the material was equal to 12, and the bottom – 6.
Check exactly whether sewn undercollar, there are no folds anywhere. Upon detection of any flaws, blind stitch fabric fight back and start sewing again.
Don't worry if the first time the suturing of the collar will seem very difficult or even impossible. With experience, you without problems will cope with this procedure in less than one hour.
Hemming the collar of his jacket before demobilization (if you serve less than a hundred days), if you want to use black thread. Some soldiers even embroider the number of days remaining before the order.
Undercollar protects the jacket from dirt and therefore changes every day. The soldiers try every time to sew a new fabric, because even once washed, it will no longer be white as the original.