You will need
  • a Hairdryer or hot water;
  • - acetone;
  • - cloth;
  • liquid for Windows and mirrors;
  • - protective film (food or building).
Instruction
1
Try to remove the film from the glass, heating it building or ordinary hair dryer. Glass before that it is desirable to remove, so it will be easier to do the work. Under the influence of warm air, the film begins to separate from the glass and easily removed. A heat gun is preferable, as the temperature is much higher. Instead of heating appliances can use hot water, but be careful, because the risk of a burn.
2
After heating tinting try it as soon as possible to remove from the glass. If it cools down, it will make it almost impossible. Try to remove carefully so the foil was not torn and separated along with the adhesive. If you failed to remove tint from the first time, heat the glass again and continue the hard work.
3
On the glass may remain a little glue. Remove it with acetone. Try hard not to wet in the means of a rag, if you get a drop of acetone on the paint, the formation of whitish spots. To be safe you can cover the painted parts of the machine in the processing area construction or even cling film.
4
Dry the glass with a liquid for cleaning mirrors, better than the one that contains alcohol. Usually after the work done, the effect is striking: tinted safely removed, and the glass Shine like new.
5
If you do not, then do not worry. Automotive stores sell special liquid, which can be used to remove tinting. But in this case, the glass must be removed, which is not very convenient. After the application of toning starting to corrode and is easily washed off with warm water. Better leave it to the professionals and contact any car dealer.