Advice 1: How to remove the yellow stain after applying liquid Wallpaper

Liquid wall – an innovative construction material, which allows to transform any interior. The ease of use, high aesthetic quality, durability are only some of the advantages of liquid Wallpaper. But the unique material is pleasing to the eye as long as possible, you need to use it. Often when error applying liquid Wallpaper on the generated surface appear yellow spots. To get rid of them effective, but effective ways.
How to remove the yellow stain after applying liquid Wallpaper
Liquid Wallpaper applied like conventional plaster, the surface after treatment with the walls soaked with the mixture may form yellow stains for various reasons. This is because the material in contact with the surface of the pull in spots. The appearance of defects is easy to prevent, but it is equally easy to remove flaws on the liquid Wallpaper.

Remove yellow stains on the Wallpaper



The beauty of liquid Wallpaper is that at any moment they can be restored – in the process of applying, after drying. To eliminate yellow spots succeed with a decorative surface by re-applying the mixture on the desired area. To do this, first removed a layer of tread on it defects, it is best to remove the layer, pre-moistened Wallpaper normal water. Then need a piece of Wallpaper is removed with a spatula. To reuse this material will not succeed.
To spot not appeared on a wall previously painted in bright colors, except for primer before applying liquid Wallpaper is also needed to cover the surface with white paint.


After the restoration of the place with yellow spots on the liquid Wallpaper is no longer visible defects, must be carefully treated working surface. On the wall or ceiling applied the primer in two or three layers. Ideally, you should use a proven professional tool. Next, you need to soak the dry mix in the correct amount and re-apply decorative liquid Wallpaper, wait for them to dry. The primer can be applied by roller and brush, but do liquid Wallpaper with a spatula.

Removal of liquid Wallpaper for the destruction of patches includes the step of wetting the surface with yellowing. Wet the ceiling or wall must be abundantly spray, sponge or roller. You should keep the Wallpaper for a deep soak for half an hour or an hour. You can repeat wetting to achieve optimal results.

How to prevent yellow stains on the liquid Wallpaper



Decorative Wallpaper require careful surface preparation before applying. It is necessary to remove from the walls, remnants of old Wallpaper, remove the old putty. Special attention should be paid to the treatment of protruding metal parts, nails, staples. These elements in contact with the liquid Wallpaper can rust, with the result that on the surface appear yellow spots. It is best to paint the metal parts with white enamel paint, one primer will be enough.
Yellow stains can appear after failure of the application technology, the use of substandard material.


Yellow spots – not always rust through the layers of liquid Wallpaper can Shine through pieces of old paper Wallpaper, paint residues, putty. Therefore, it is important to ground surface. To remove yellow stains after the application of decorative liquid Wallpaper, you need to have a mixture of the desired shade. Therefore it is impossible to buy material, "butt", is to take a little more liquid Wallpaper than is required for consumption.

Advice 2: How to remove liquid nails

Liquid nails is a modern gluing material that can withstand that kind of pressure, to make which possible only mounting bolts and other connecting components. But sometimes there comes a point when glued with liquid nails surface should be divided and remove glue residue.
How to remove liquid nails
You will need
  • - water or solvent on the mineral basis;
  • special cleaners;
  • - scraper.
Instruction
1
If the liquid nails was applied recently, and they did not have enough time to dry, then rinse off it the adhesive is ordinary tap water or the solvent is mineral based. Sealant have not had a good freeze, so it perfectly washed away these fluids.
2
In that case, if the sealant has dried up, i.e. from the moment of its application was already quite a lot of time for removing liquid nails, use special cleaners.
3
If no cleaners, for removal of solidified sealant, you can use a scraper. Clean the scraper very gently, so as not to damage the surface.
4
Because the operating temperature of liquid nails varies from -40 to +50 degrees, and this adhesive is afraid of direct sunlight, keep the item that was previously glued using liquid nails for a while under direct sunlight (preferably in the yard was a hot summer day). Then, using the scraper will clean the surface.
Note
Remember: all cleaners and solvents on a mineral basis are aggressive substances, which can have a detrimental effect on unprotected skin. Work with them only with gloves!
Useful advice
It should be remembered that liquid nails come in two varieties: water-based, and also solvent based. Depending on the adhesive requirements, choose one or another type of adhesive. So liquid nails perfectly cope with such tasks as gluing of rough and smooth surfaces, for bonding metal and wooden objects and so on. Liquid nails are a perfect adhesive material which can withstand even the weight pyatidesyatimetrovoy plate. Given these characteristics of liquid nails, to remove them you should pick up the special cleaners.
Is the advice useful?
Search