Instruction
1
To begin, remove the phone cover, on which there are pinholes. So you will have more chances to eliminate them.
2
Get an electric razor, if possible, having a linear actuator. These razors can be found, for example, Brown or Panasonic. Prepare a soft cloth without villi, which are commonly used to remove dust from the monitors.
3
When you have everything prepared you can start. So, remove the razor mesh.
4
From the napkin cut out the circle, which, if you roll it in half to fit on the blade from the razor. Take the cut piece of cloth, attach it to the blade and tape the edges with silk threads. Try to keep a soft cloth is secure on the blade and could not fly during the movement of the razor.
5
Turn on the shaver and begin to gently Polish the scratched surface of her phone. Do everything very carefully, keep in mind, if the cloth moved away, you can further scratch your cell phone. Polish until the complete disappearance of visible damage usually takes a few minutes.
6
Another way to remove scratches - paste GOI. Take a small pebble of toothpaste, which you can buy in the store, and RUB it flap woolen fabric. It is better that the matter was solid.
7
Then RUB with a flap scratches. Even in quite significant damage you will need about 20 minutes of effort they are not gone.
8
Third safe and easy way to get rid of scratches is to Polish the discs. To do this, take a tube of Polish and carefully apply a few drops on small fissures.
9
Now take a cotton cloth or cotton wool and carefully RUB over the entire surface. Perhaps full freedom from damage will take you a few minutes. Once the scratches disappear, erase the remnants of polishing with a dry cloth.