Advice 1: How to Polish glasses

If treated glass points are damaged and they formed small scratches. Lenses with diopters with additional coating, self-polishing is not recommended, they are only replaced by a new one. But ordinary glasses and sunglasses polycarbonate lenses can be put in order at home.
How to Polish glasses
You will need
  • paste the GOYIM;
  • - abrasive paste for polishing car;
  • - felt, cloth, felt or microfiber;
  • grinding machine;
  • - toothpaste;
  • Wat.
Instruction
1
Before you Polish the glasses, go to the hardware store and buy a paste GOI on the basis of chromium oxide, developed in the years 1931-33 Soviet scientists of the State optical Institute. In the sale you can meet a fine paste with fine abrasive grains of a dark green color. Also get a cloth, felt or a felt cloth.
2
Apply a small amount of pasta GOI with a soft cloth and Polish glasses with circular movements of the fingers. Spread the paste over the entire surface of the lens.
3
If you want to get a perfect result or to hide a deep scratch, use a sander to Polish glasses. Attach foam or felt the nozzle on the machine, apply the paste GOI and turn on medium speed. That the machine is not heated in the process of polishing the glasses to take short breaks.
4
Finish the polishing of lenses of any vegetable oil. Drip a little oil on a microfiber and wipe the glasses with the two sides in a circular motion.
5
Instead of pasta GOI use abrasive paste No. 80 for polishing of car body, which is sold in stores topcoats. It will allow you to Polish the glasses is not worse than the chromium oxide. The algorithm for grinding and polishing lenses is the same as with the paste of the State optical Institute.
6
If a special paste for polishing of glasses you are found, then use the handy tools. Apply to cotton wool a small amount of toothpaste, but not bleaching, otherwise the abrasive particles contained in it will worsen the condition lenses. Wipe the glass in circular motions for some time.
7
Rinse the glasses in warm water. Remove the toothpaste residue with a special fabric for the lenses and wipe dry glasses. Retry the operation, if the first time you have not achieved the desired result.

Advice 2: How to Polish glass

Before polishing glass, it must be sanded to remove scratches. In the absence of the grinding machines you can do the drill, and to save time will help chemicals.
How to Polish glass
You will need
  • A set of powders that contain abrasive particles. There should be coarse-grained and fine-grained powder.
  • Coarse-grained corundum sandpaper, which can replace the powders.
  • Lubricant.
  • Sander.
Instruction
1
Before polishing glass, you need to implement it a thorough sanding. First, the surface is treated with the coarse abrasive powder, then use fine-grained. Grinding is necessary in order to hide scratches. Next, the desired amount of lubricant, which should be thick enough to mix with the abrasive powder and to carry out polishing.
2
You can also use a diamond polishing paste, but then scratch you first need to cover with a thin layer of kerosene, and then apply the paste. You then take the drill, wrap the drill bit with a piece of felt and start polishing. This process takes a lot of time, but the scratch disappears.
3
The third option of polishing glass is the easiest. It is that hide the scratches with wax polishes for furniture. Scratches just filled with this substance and cease to be visible.

If the glass has many scratches and area damage is big enough, it is better for polishing use an electric sander.
4
Even with the use of grinding machines polishing glass takes a lot of time. Grinding is divided into 2 or 3 stages. Every time a new stage, it is necessary to change the polishing paste, stopping the choice on pasta with less graininess than the one that was used before. On the one hand, a sander will make it much easier, on the other hand, she needs to be able to work. If you press the polishing circle against the glass too hard, it may crack, and if, on the contrary, to make enough effort, then a polishing round will damage the glass surface.
Useful advice
Sometimes the glass is polished by chemical reagents, but they give the effect only for a short time, and after 2 months the glass acquires a yellow tint.

Advice 3: How to Polish plastic headlight

Over time, plastic headlights of the car start to thicken. They appear small scratches and chips, Polish which will not be difficult. Polishing it is useful to before winter, when the transparency and the brightness of the lights is particularly important.
How to Polish plastic headlight
You will need
  • Polish;
  • - sponge;
  • water;
  • - gloves;
  • - toothpaste.
Instruction
1
To start glue masking tape the body around the headlights. This is to ensure that when polishing not to damage the paint on cars. Place under the tape, you can spread with butter, and when removing it is not the tears along with the paint.
2
Wet sandpaper needs to be sanded surface of the headlight, removing all scratches and chips. Once the plastic surface of a headlight will become Matt and smooth, wipe it with a dry cloth or air dry. Base is ready for polishing.
3
Polishing sponge must be rinsed under running water to her there was not a single grain of sand! Then press the sponge, but not completely, but only so that there was no visible water drops.
4
Apply wax to the headlamp or sponge; if convenient, may be applied to different places lights one drop. Importantly, the Polish was not too much. Slow circular motions, pressing lightly on the sponge, and begin polishing. The sponge has to be wet, so it does not dry up and does not scratch the surface. Watch carefully below the surface lights did not get sand or dust.
5
As soon as all the wax will disappear, rinse the headlight and dry. If the surface you will notice a frosted spots, again Polish of this place. If the headlight shines like new - get to finely polishing abrasive Polish. It is used for the same technology as the main Polish. After it also be sure to rinse the headlight with water.
6
Some motorists suggest polishing the headlights with toothpaste. The technology is the same. To smear, RUB and rinse. Only apply a small amount, because they can be unsightly white flakes.
Note
You can use a polishing machine, but this requires some skill of the polisher. If the machine keep in one place, you can harm the plastic.
Useful advice
Pay attention to white divorce from polishes. If they just do not wash, then they will remain for a long time, especially on the plastic parts of the car.
After high quality polishing of headlights Shine on 30-40% brighter.

Advice 4: How to Polish the display

If you cherished mobile phone, it can receive scratches. It is certainly unpleasant. You can live with the damage display of the phone and move on, especially since they usually are only visible in the sun. You can ask for help in the service center – you will replace the phone screen. You can fix the situation with the scratches yourself with polishing at home.
How to Polish the display
You will need
  • - suede cloth;
  • paste the GOYIM;
  • a tool for removing scratches from CD/DVD discs;
  • - cotton pads, cotton buds and wet wipes.
Instruction
1
Screen replacement mobile phone with a specialist costs money, and considerable – if you change the touchscreen, the service repair can make about 50% of the cost of a new phone. Immediately it should be noted that it is the most reliable method of repair. If you don't want to pay for the replacement of the display of your phone in the service center, do some home repairs.
2
Polishing display – it simple, but quite dangerous for the phone itself. The essence of polishing is to wipe the top layer of the display. If you accidentally anti-glare or touchscreen, to contact the service center will need.
3
Before polishing dismantle the phone and remove the screen in the process of Stripping the top layer do not clog with mud the entire phone. Remove from the phone screen various pollution. This should be done with a damp cloth or detergent for cleaning the surface of mobile phones.
4
Polish display in several ways:
- with the help of suede – the procedure is long and from all the scratching does not relieve;

- a paste GOI – there are a large number of its applications (with buffing machine, cloth, machine oil, etc.). The long-awaited result will make you happy and free from scratches will not be over;

- with the tool that removes scratches on CD/DVDs – the most efficient way for polishing: quickly and easily removes scratches, but after a month or two, the procedure must be repeated, because the old scratches still show up.
5
After polishing, gently remove the remnants of the polishing tool cotton swabs and sticks. Buy the case – this saves the mobile phone from possible mechanical damage. Safely protect your mobile phone from scratches on the display protective film. She is on the phone from the date of purchase or after polishing.

Advice 5: How to Polish glass scratch

In the process of operation of the glass of the car may be covered by macrocarpon and chipped. Transparency is lost and the machine becomes more complex. In order to get rid of this problem, you need to Polish the scratches on the glass of the car.
How to Polish glass scratch
You will need
  • paste for polishing.
Instruction
1
Buy polishing paste for automotive glass. It can be abrasive (paste fine grit) on the basis of chromium oxide, iron or cerium. Paste is based on cerium, which is a water suspension of brown color, is considered the most effective.
2
Prepare the glass to be polished: carefully wash and dry it. To get the perfect clean. Protect with plastic or fabric to the back of the machine against ingress of polishing paste.
3
Apply the paste on the places where the glass scratched. Do it manually or with polishing machine. Make sure that the paste is filled in all the gouges and scratches. Micro-scratches, which are glass, you can buff out by hand. If it is necessary to tidy a big area, use electric polishing machine. Spend polishing using a special polishing heads. If you are not using a special tool, hand polished, take a piece of fabric or felt. Be careful – the glass should be transparent and smooth again.
4
Wait for curing of the pastes. Wash the glass in the usual way.
Note
Many motorists, polished glass, forget about lights. It also happens that the owner of the car prefer to replace cloudy or scratched glass headlights. In this case you have to either purchase a set of headlights (which is not too cheap), or settle for a fake. However, the polishing headlights can get rid of unnecessary spending.

Polishing headlight lenses is indispensable in the case that one headlight was damaged during the accident, and her place was taken by new. That was not a strong difference between the clear and cloudy new old headlight, you can spend polishing one of them.

Often carry out polishing of the windshield. This procedure gives the transparency and original Shine. Optics of the glass remains the same: is not formed, the effect of the lens, the glass does not become wavy.

Advice 6: How to Polish bathtub

Increasingly popular now are acrylic bathtubs – they are convenient to install, much easier to iron or steel, are available in a range of different shapes and sizes. There are drawbacks, the main of which – short life: from falling in the bath heavy object may result in a crack, in this case a bathtub is beyond repair. However, acrylic bathtub easy to care for, to remove minor damage, self-polishing.
How to Polish bathtub
You will need
  • detergent;
  • - wax polishing;
  • silver Polish, toothpaste;
  • - vinegar or lemon juice;
  • - spray chrome-plated surfaces;
  • - small sandpaper, abrasive Polish;
  • - sponge, rag of soft cloth, sponge.
Instruction
1
Clean and Polish tub acrylic: clean with a wet sponge and a small amount of detergent. Do not use detergents containing abrasive components, alcohol, formic acid (formaldehyde) or ammonia. The use of such detergents or washing powder and bath cleaning without water leads to tarnishing of the surface.
2
Apply the detergent evenly on the entire surface, leave the bath in such condition for 5-10 minutes, then wipe with a sponge and rinse with water. Repeat the procedure if necessary.
3
Apply a wax Polish on the surface of the bath and gently RUB with a cloth of soft fabric.
4
Remove stubborn stains with liquid detergent, silver Polish or toothpaste: apply it on a rag of soft cloth and RUB the stain.
5
Remove limescale stains from the surface of the bath with lemon juice or vinegar. Moisten a rag of soft cloth in hot vinegar or lemon juice and RUB the stain.
6
Spray the aerosol for cleaning chrome surfaces directly on the chrome bath, rinse with a strong jet of water (in case of strong pollution leave the detergent on the surface for 5 minutes), wipe dry with a sponge.
7
Polish hot tub acrylic: fill it with warm water, dissolve in water, liquid detergent, run a hot setting for five minutes. Turn off the whirlpool system and leave the water bath for 10 minutes, then drain.
8
Fill water in the hot tub again and turn on the whirlpool for 5 minutes, then drain the water, do the cleaning and polishing as a normal acrylic bathtubs.
9
Remove small scratches from the acrylic surface of the bath, wash the bath, gently RUB the scratch with fine emery paper, then an abrasive Polish, in the least apply and RUB the wax Polish.

Advice 7: How to Polish glass on the phone

Mobile phones are an indispensable means of communication in our life. However, their service and care aimed at the preservation of the original species still require further improvement. Questions about care particularly relevant when you want to Polish the glass on the phone.
How to Polish glass on the phone
You will need
  • - polishing wheels;
  • - polishing paste;
  • - cotton swabs.
Instruction
1
Please rate the degree of deterioration of the glass on the phone. Perhaps in the case with your phone, simply sticking a special protective film, which will return the glass smooth and pristine brilliance. If you still believe that the glass on your phone has worn out, then proceed to updating it.
2
Polish phone screen special polishing laps. Choose wheels, rubber-based. They are perfect to help get rid of deep scratches and level the surface on the glass. Their application is only required if the scratches are too deep. After applying polishing wheels, be sure to use the paste GOI.
3
Purchase a GOI paste. This paste will be your first step in Troubleshooting your phone. The inventors of pasta, the researchers State Optomechanical Institute, recommend the use of toothpaste to eliminate scratches and small cracks. The fact that it operates on the principle that when particles of the paste fills the microscopic space and the depth of the cracks, leveling and smoothing the glass surface of the screen.
4
Apply a small amount of paste on thick cotton swab or paper towel.
5
Uniform circular motion RUB the paste GOI on the surface of the glass. Carefully Polish the entire screen, not missing a single millimeter. Missed areas will differ from polished matte sheen.
Note
In any case, do not use solvents for polishing, as is sometimes required by the manual polishing autopost.
Useful advice
If for some reason the paste GOI does not suit you or you are unable to find it, you can use instead of the soft polishing autopaste or toothpaste without grains and bleaching.

Advice 8: How to Polish glass on the clock

Have a brand new wristwatch transparent glass, polished perfectly. But over time, even if the clock treated very gently, on the glass formed the many subtle scratches, which degrade its appearance. If the treatment was negligent, or, for example, occurred accidentally in contact with hard surface, scratches can be coarse, well marked.
How to Polish glass on the clock
You will need
  • - pieces of thick leather or felt;
  • - polishing paste (for example, GOI), toothpaste, mineral oil.
Instruction
1
Can I return the time glass the original form at home depends on what material is made hour glass. The most common and cheapest option – organic glass. Less common natural glass. The most rare and therefore most expensive option is the sapphire glass. It is made from artificially grown crystal and it is often applied anti-reflective coating. Sapphire glass is characterized by great hardness of the surface, so scratch it very hard. But sometimes it still happens.
2
Carefully remove the glass, start moving it waves a piece of leather or felt, covered with a mixture of polishing paste with water. If the scratch is very shallow, barely noticeable – take to work the fine-grained paste for fine work. For example, paste GOI (from the abbreviation "State Optical Institute") is divided into coarse (4), medium (number 3) and thin (rooms 2 and 1).
3
After some time wash the glass, dry thoroughly and evaluate how successful was the work. If the scratch is almost gone, apply a new piece of leather or felt a little toothpaste, add a few drops of water and again RUB the glass wave-like movements. After some time, wash, dry, RUB the glass a little mineral oil. It will look like new.
4
If the glass is natural, right tune that the work will take much more time. Because the material is much more rigid than organic glass. So it makes sense to start with coarser paste GOI (4), gradually replacing its middle, and then thin. Otherwise, the algorithm does not differ from that described above.
5
Well, if you have a sapphire crystal, not worth the risk, because the material in addition to hardness highly brittle, sensitive to impact. When repairing the home is the glass easy to crack. So better take your watch in for service.
Useful advice
In addition to the pasta GOI can use other polishing materials, such as Crocus or polirit.
Search
Is the advice useful?