Instruction
1
Select a convenient place for installation of the water purifier trio Aquaphor and tap for clean water. Typically, the water purifier is placed directly under the sink. Make sure that cleaning of the tube will pass without kinks.
2
Install the faucet to clean voditelya in the sink hole of the necessary diameter. Unscrew the cap nut with the threaded shank of the faucet. Install the rubber gasket and decorative stand on the threaded shank of the faucet. Insert the faucet for clean water in the hole of the sink. Secure the plastic and metal retaining washer and retaining nut on the threaded shank of the faucet located at the bottom of the sink. Insert the threaded shank of the faucet pipe and tighten flare nut. Insert the tube must end on which is located zapressovana conical sleeve. Make sure that the tube is securely fixed.
3
Install the adjusting canpenetrate cold water. Connect the tee with the inlet valve of the pipeline with method of the frame. Install the sealing gasket and the adapter on the input tap. Remove the clip from under the plastic sleeve adaptor. Moisten the tube with water and insert it into the adapter until it stops. Fix the clip under the plastic sleeve adapter. Make sure that the tube is securely fastened.
4
Connect the water purifier trio AquaphorInstall the main body of the water purifier with brackets included in the package. Note that for replacement filters, you should leave the bottom a distance of at least 10 cm, Remove the from the output and input fittings water filter clip under the plastic grommet. Click on the end of the plastic sleeve and pull the plug. Moisten the tube with water and insert until it stops. Connect the pipe from the input tap to the entrance of the water purifier. Connect the pipe of the faucet for a clean water outlet of the water purifier. Install the clips under the plastic bushing of the outlet and inlet of the water purifier trio Aquaphor.
5
Secure loose portions of the tubes so that they did not periklis other items.