How to connect audio from motherboard

First, install the driver on the built-in sound Board. Find the disk that came with your motherboard, there should be everything you need, including these drivers. Installing sound drivers happens almost automatically – just insert the disk into the drive, click the line responsible for the installation, and follow the instructions on the screen. The installation wizard will ask you to accept the license agreement, agree with them, click Next and wait for installation to finish, then restart the computer or laptop.

After you boot into Windows, wait until the system detects a new device (i.e. your sound card) and install the driver. In the end, you should receive a message saying that the device is installed and ready to use.

Plug the wire from the speaker connector to sound Board. If it's speakers, it is sufficient to connect only one wire. If it is a 6 - or 8-channel audio system, the wires can be several. If you have a computer, the connectors on the sound Board is usually painted. Green salad or a color marked input for the stereo speakers and center speaker in the case of multi-channel audio system. Problems with detection of the desired connector should arise, just put the corresponding wire. Have multichannel audio all the wires that connect to the sound card, usually painted in the same colors as the connectors on the sound card.

If you have a laptop, plug the sound Board can be any color. To avoid mistakes, refer to the user manual, or you can turn on the laptop the music and alternately insert the plug in a few connectors on it until you hear sound. You can not be afraid that you insert the plug into the wrong connector, as it does not harm the laptop.