Consider the text you are going to place on the table with regard to its dimensions. Usually, signs enough of the size of half a standard sheet of paper of A4 folded lengthways. This 10 – 10,5 28-30 see the Inscription as a rule, is the font the same size, located in the middle of the field. If you want to make the labels a different font size, keep in mind that they should be well readable from a distance.
Start a text editor Microsoft Word and on the head panel, on the File menu, select page setup. Here you can set the paper orientation – portrait or landscape, when a long side of the sheet will be horizontal. Here you can specify the page size by reducing its height to the size of plates.
On the main panel in the View menu, connect the Draw toolbar, which will appear after activating the lower pane in the editor window. Here you can choose the frame that will surround the text of the labels and to ask any type of line.
To get involved in color scheme especially should not – in order to sign better to read and noticed, the font color and background should be as contrasting.
Advice 2 : How to make a sign
The plate or the small size of the sign that says usually do not require sophisticated graphic design, it contain only brief text information. Standard software installed on any computer, such as Microsoft Word, allows us to produce any sign of the quality is not worse than printing.
First, you need to think about which text you will write, given its readability and the limited size of most tablets. Usually, for label placement uses a standard sheet of paper A4 or half, folded length with size 10.5 to 28 inches. Your task is to write a short text with a maximum load information.
Consider the placement of labels and size of fonts used. They should be easy to read and visible from some distance. Better if around the text will be left from all sides of the field, this visually sets them apart plates and attracts attention.
Activate the text editor and configure the settings page, specify the paper size and set orientation – portrait or landscape location of the sheet.
On the main panel, which is located on top, connect the Draw panel, usually after activation, it appears at the bottom of the window. Select the label and the rectangle, select the area where you will place your text.
Textual content can be printed by selecting the appropriate font, set its color and size. For better visualization, position the inscription is symmetrical relative to the center.
In this menu you can set the background color and, if necessary, choose a frame that will surround the text. The background color and the lettering is better to make the most contrast, it attracts attention and facilitates perception of the text.
Sign print on thick paper, glue it to a cardboard base for the best safety it is possible to laminate special transparent adhesive film. Hang a sign at your selected location just above eye level – at a height of 1.5 – 1.7 meters, then it will be visible to all.